JL Audio Car Speaker SB D DRNGO 10W0 User Manual

®
Stealthbox  
I N S T A L L A T I O N G U I D E  
START  
HERE  
for the  
SB-D-DRNGO/10WØ  
(Fits 1997-2001 Dodge Durango, models  
with three seating rows only)  
STEP 1: Unbolt the second row of seating  
from the vehicle and remove as single unit.  
STEP 2: Remove the black plastic covers  
from each side of the armrest, of the center  
seat.  
STEP 3: Remove the fourTorx bolts that  
attaches the armrest to the center seat.  
This Stealthbox is a product which  
requires professional installation skills and  
tools.  
Please read this installation guide thor-  
oughly before beginning the project. It  
will guide you step by step through the  
installation. Several of the steps in this  
process may require two people to  
accomplish.  
It is absolutely vital that the enclosure  
be properly mounted to the vehicle  
according to these instructions. Failure  
to mount the enclosure properly pres-  
ents two problems: 1)The sub-bass  
performance will suffer due to the  
movement of the enclosure caused by  
the force exerted by the woofer(s) and  
2) A loose enclosure presents a serious  
safety hazard in the event of a collision  
or sudden deceleration.  
STEP 4: Lift off the armrest.  
STEP 5: Remove the upholstery from the  
lower center seat by releasing the four plastic  
clips holding it in place.  
STEP 7: Measure 2 1/4" from the front lip of  
the center seat structure side bars. Make a  
mark at the 2 1/4" measurement.  
STEP 6: Remove the upholstery and foam  
from the seat frame to expose the metal grid  
structure.  
STEP 8: Drill a 5/16" hole centered left to  
right in each side bar at the 2 1/4" mark.  
Please enjoy your JL Audio Stealthbox  
responsibly.  
Continued on Next Page  
SB-D-DRNGO/10WØ, JL AUDIO, Inc 2004  
Page 1  
Sheet SKU#011103 Revision 6/28/2004  
 
Cont.  
From  
Previous  
Page  
CONGRATULATIONS!  
INSTALL COMPLETE.  
Included Hardware:  
(4) 1/4" x 2" Bolts  
(4) 1/4" Washers  
(4) #8 Flat Head Screws  
(4) 1/4" Lock Washers  
(1) Console Insert  
STEP 13: Attach the plastic clips on the  
Stealthbox upholstery to the bars under the  
seat structure.  
STEP 14: Run speaker wire from the amplifi-  
er to the Stealthbox mounting location. Be  
sure the wires are routed in such a way that  
they will not be pinched when the seat is rein-  
stalled.  
STEP 15: Place the seat back in the vehicle  
and connect the speaker wires to the  
Stealthbox.  
Do not overstretch the upholstery  
STEP 16: Bolt the seat in place in the  
reverse order that it was removed.  
Difficulty Of Installation:  
Mid/High Frequency Driver Information:  
Specifications:  
Enclosure Type: Acoustical Suspension (sealed)  
Driver Type: 10WØ  
Nominal Impedance: 4  
Cont. Power Handling: 125Watts  
Front Location Driver Size:  
6.5”  
VR650-CSI  
Applicable JL Audio Products:  
TR,VR,XR,ZR 650-CSI  
JLAudio recommends using a high quality amplifier such as the JLAudio e2150. The diagram below shows the recommended  
crossover, infrasonic filter and equalizer settings for the e2150 when being used to power your Stealthbox®.  
Rear Location Driver Size :  
5.25”  
Applicable JL Audio Products:  
TR,VR,XR 650-CXI  
TR525-CXI  
The JL Audio e2150 is a very versatile audio component. Please consult the owner’s manual for detailed information  
about installing and tuning this amplifier.  
10369 N. Commerce Pkwy, Miramar, Florida 33025-392  
Phone: 954.443.1100  
Fax: 954.443.1111  
SB-D-DRNGO/10WØ, JL AUDIO, Inc 2004  
Page 3  
Sheet SKU#011103 Revision 6/28/2004  
 

Insignia Portable DVD Player NS CAPDVD7 User Manual
Jenn Air Microwave Oven W10244851A User Manual
JVC CD Player KD DV7401 User Manual
JVC DVD Player XV S400BK User Manual
Kaidan Camera Accessories KiWiTM 2900 User Manual
Kenmore Sewing Machine 385 17630 User Manual
Kenwood Water Dispenser CM750 User Manual
Kettler Elliptical Trainer 07861 600 User Manual
KitchenAid Microwave Oven W10351317A User Manual
Klaxon Smoke Alarm 120 DC User Manual