Jensen Automobile Accessories BT 390 User Manual

Bluetooth Handsfree

Car Kit with LCD Display

User’s Manual

Model: BT-390

u Display Settings··································································2 0

Adjusting Display Contras t ····························································· 20

Adjusting Display Brightness·························································· 21

Changing the Backlight Color························································· 21

Enabling Auto Dim Scree n ····························································· 22

v Other Settings·····································································2 2

Setting up Automatic Phonebook Synchronization························· 22

Finding Out the Device Software & Firmware Version···················· 23

w Multimedia Functions··························································2 3

Setting up FM Transmission ·························································· 23

Using A2DP Media Player······························································ 24

Text-To-Speech Setting ·················································2 5

Factory Settings Rese t ···················································2 6

Bluetooth Firmware and CPU Software Upgrade ··········2 6

Troubleshootin g ······································································2 7

Notes on Safety

1. Unit installation – Installing the BT-390 Music Handsfree Car Kit requires

specialized knowledge and skills. Incorrect installation may cause damage to your

BT-390 unit and/ or your vehicle!! Therefore, it is strongly advised that the system

be installed by a qualified professional.

2. Installation location – Unsuitable installation locations may lead to incorrect

functioning of the essential vehicle safety equipments such as air bags or it may

become a source of injury in an accident. Please always consult a professional

installer and carefully choose the correct installation location in the car.

3. Interference with on-board electronics – Incorrect installation or unsuitable

installation locations may cause interference with the vehicle electronics systems.

Please consult the vehicle manufacturer’s notes if needed.

4. Road safety – We strongly advise that you always pay full attention to traffic

conditions whenever the vehicle is moving. Distraction can lead to a dangerous

traffic situation. Even when using a handsfree car kit the driver is always advised to

avoid phone calls during difficult and complex traffic situations.

5. Use only approved replacement parts – Please always use official parts for

your car kit as unknown spare or replacement parts may lead to malfunctions.

1. Introduction

Carefully unpack the BT-390 Bluetooth Handsfree Car Kit

and check that the following items are included:

n Identifying Components

Unpack the Car Kit package and ensure the following items

are included.

Remote / Bracket / Clasp /

BT-390 LCD

Part # 31132450

Junction Box

Part # 31132100

CR2032 Battery

Part # 31132000

Stand

Part # 31132060

Speaker

Part # 31132430

Microphone

Part # 31132440

Fuse Set

Part # 31132010

Power Cable

Part # 31132010

Note:

If any item is missing or damaged, please contact your

dealer.

_{Download from Www.Somanuals.com. All Manuals Search And D}1_ownload.

2. Installation

This section demonstrates how to set up and install the BT-

390 into a vehicle.

n Installing the Junction Box

The Car Kit is designed to work with the 12/ 24-volt power

supply of the vehicle. Refer to the following to install the

junction box in a vehicle.

1. Locate a suitable place inside the car to mount the

junction box. Select a dry place that avoids excessive

heat and mechanical vibration. Ideally, the junction box

should be hidden from view, but still easily accessible.

Note:

Make sure that the cables are long enough to support

the location of the junction box. If the cables are not long

enough, do not lengthen the cables. Instead, relocate the

junction box.

2. Use two screws (not included) to fasten the junction box

in place.

_{Download from Www.Somanuals.com. All Manuals Search And D}3_ownload.

2. Installation

o Connecting the Power Supply (For Options 1 and 2 only)

The following illustration demonstrates how to connect the

Car Kit’s power cables to the vehicle’s electrical system.

Important:

The blue cable must be connected to the 12/ 24V

switched to enable the Car Kit to go into standby

mode.

Do not connect the blue cable to the +12/ 24V

constant. Doing so may discharge the battery of

the vehicle and prevent the Car Kit from being

reset.

_Downlo4_{ad from Www.Somanuals.com. All Manuals Search And Download.}

2. Installation

p Connecting Components

The following illustration shows where to connect the

components.

Item

Description

The caller ID should be placed on the dash

within view of the driver and passenger.

(See Installing the Caller ID Display on

page 9.)

Caller ID

Ideally, the microphone should be located in

front of the user and above waist height.

Microphone

Speaker

For best reception, the speaker should be

mounted at least 80cm (30 inches) from the

Car Kit’s microphone.

_{Download from Www.Somanuals.com. All Manuals Search And D}5_ownload.

2. Installation

q Preparing the remote control

The control module is designed to attach to the inside of the

steering wheel on the left or right side.

Installing the battery

Before attaching the control module, install the supplied

battery.

1. Remove the battery cover from the rear of the control

module.

2. Insert the new battery with the correct polarity as shown

below.

3. Put the battery cover back on.

_Downlo6_{ad from Www.Somanuals.com. All Manuals Search And Download.}

2. Installation

Attaching the remote control

Refer to the following to attach the control module:

1. Attach the rubber clasp to the two notches on one side

of the bracket base.

2. Pull tightly on the rubber clasp by holding it firmly from

the middle and position the bracket base on the inside of

the steering wheel.

3. Wrap the rubber clasp tightly around the steering wheel

and secure it on the other two notches on the bracket

base.

_{Download from Www.Somanuals.com. All Manuals Search And D}7_ownload.

2. Installation

4. Attach the bracket cover with the two supplied hex bolts.

5. Slide the control module into the module bracket as

shown. (To remove the control module, push the release

button to the right and remove the control module.)

6. Now the remote is attached to the wheel.

_Downlo8_{ad from Www.Somanuals.com. All Manuals Search And Download.}

2. Installation

r Installing the Caller ID Display

The caller ID is designed to sit on the

dashboard or other location. Once it is

attached to the stand remove the

adhesive cover from the sticker pad

(attached) from the base and press

firmly to secure in place.

If you wish to attach the LCD display elsewhere, such as

next to the car radio, detach the base from the stand by

removing the screw as demonstrated.

Turn the stand inwards and apply a sticker pad (provided)

to the back of the stand. Position the stand and press firmly

to secure in place.

_{Download from Www.Somanuals.com. All Manuals Search And D}9_ownload.

2. Installation

s Installing the Microphone

Before installing the microphone, take note of the following:

Make sure that the cable can reach from the microphone

to the speaker. If the cable is too short, relocate the

microphone. Do not lengthen the cable.

The supplied microphone is uni-directional. For best

results, place the microphone in front of the person

talking. It has a reception angle of 60 degrees, and is

most effective within a 60-cm radius.

Installing the Microphone

Find a suitable place for the microphone. Remove dust and

grease from the surface.

1. Remove the protective

cover from the Velcro and

press it firmly onto the

bottom of the microphone.

2. Remove the protective

cover from the other Velcro

pad and firmly press the

pad in place.

3. Attach the microphone.

_Downlo1_ad0_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

n How to Operate the Car Kit

Understanding the icons on your screen and remote control

Please see below for the explanations of the icons on the

main screen.

_{Download from Www.Somanuals.com. All Manuals Search And}1_D1_ownload.

3. Operation

o Basic operation

Connecting to the Mobile Phone for the First Time

As soon as the ignition is turned on “BT-390” text will be

displayed on the backlit screen and it will quickly enter the

“Pairing” mode searching for available Bluetooth mobile

phones for pairing up. If the pairing screen does not display

automatically, turn on this function manually (See

Connection Settings on page 18).

Pa iring

BT-390

Switch on mobile phone’s Bluetooth connection and

conduct a search for a new Bluetooth audio device. When

you see BT-390’s name appearing on the mobile phone

screen please select this item to pair and enter 1234 when

prompted by the password request. This will allow BT-390’s

device name to reside in your mobile phone memory, listed

along with other previously paired devices in the handset.

You may need to press the connect command on the phone

to establish the connection with BT-390 after pairing and

the mobile phone name should appear on the main screen.

Nokia 6230i

C onnec ted

The car kit screen will also display battery and signal

indications if your phone supports these functions.

Note:

Please contact your dealer for a compatibility list.

_Downlo1_ad2_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

p Dialing the First Call

Scroll down to enter main menu and go to Dial Number

then press the Enter button. Scroll up/down to go to your

desired number, press Enter to select the number.

Phone Book

1 2 3 4 5 6 7 8

C a ll History

Dia l Number

Settings

0286655757

Once you have finished selecting all the numbers required,

press Answer to call the complete telephone number you

have just entered.

Receiving and Ending a Phone Call

When there is an incoming call, press the Answer button to

accept the phone call. To end a call, press the Reject/ End

button to terminate the conversation.

Adjusting the Conversation Volume

User can adjust the volume during the conversation by

pressing the up or down scroll button on the remote.

q Advanced Operation

Phonebook Functions 1 – Updating Phonebook

Phone Book

C a ll History

Dia l Number

Settings

_{Download from Www.Somanuals.com. All Manuals Search And}1_D3_ownload.

3. Operation

There are a number of ways to upload your phonebook to

the BT-390, if your mobile phone supports automatic

phonebook synchronization (for example, Nokia 6230i), it

will upload call history, phone book entries, and sort the

phone book as soon as the phone is connected with the car

kit.

Note:

Phonebook synchronization and sorting time may differ

depending on size of phonebook list and also the phone’s

transfer speed. This may also affect the initial remote

control response at start up.

In the event that you do not wish to upload automatically,

you can disable this function and upload the phonebook

manually. To setup manual phonebook upload, please

follow the steps below:

Settings → Phone Book Sync →

Enable/Disable

See Other Settings on page 22 for more information.

Note:

Phone Book Sync default setting is enabled.

To force sync the contacts manually from both phone

memory and the SIM card, please follow the steps below:

Phone Book → Sync Phone Book

Please note that automatic phonebook synchronization will

add in new contacts which are entered into your mobile

phone but it will not delete the entries which have been

removed from your phone. To update your deletions (or

additions); please use the Sync Phone Book function.

_Downlo1_ad4_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Na me & Numbers

Sync Phone Book

Rec eive C onta c t

Ba c k

Note:

Contacts are picked up in random order by the car kit;

therefore, BT-390 will perform the sorting function in the

background after the sync. If you access the phonebook

before the sorting is completed, you may see that some

contacts are not displayed in right order. This is normal for

the first time sync and please waits until the sorting process

is completed before accessing the phonebook.

However, if your phone does not support automatic

phonebook synchronization (which also means you cannot

use the Sync Phone Book function) you will need to send

the required entries manually from the mobile phone to the

car kit under the Object Push Profile (OPP) mode via

Bluetooth (also known as Sending Business Card via

Bluetooth function). To use the OPP mode for uploading

contacts please use the following steps:

Phone Book → Receive Contact

Na me & Numbers

Sync Phone Book

Rec eive C onta c t

Ba c k

Soon after you select Receive Contact, the BT-390

temporarily disconnects from your mobile phone to allow

the contact entries to be sent over. Access your phonebook

now and go to the required contact entry. Choose option on

your phone screen and select send via Bluetooth to transfer

the contact to car kit (Command may vary on different

handset please consult the phone manual). BT-390’s

_{Download from Www.Somanuals.com. All Manuals Search And}1_D5_ownload.

3. Operation

screen will display the contact received. Repeat the process

for other entries if necessary. Once you have finished,

press the Reject/End button to stop OPP mode and re-

establish the Bluetooth link with your mobile phone.

Note:

Some phones support sending multiple contacts in one

operation under the OPP mode (such as Mark all function

in Nokia). It is recommended that no more than one

hundred selections be sent at a time.

Phonebook Functions 2 – Search for a Name to Call

After the phonebook is uploaded contacts will reside in the

car kit’s memory. You can search these entries to call by

going through the A-Z index and selecting a character to

look up a particular name that starts with the alphabet. For

instance, choose E and it will list the names starting with E

(Erica for this instance). To go to a desired phonebook

entry, scroll up/down the alphabetical list and select a letter

entry.

Phone Book → Name & Numbers →

ABCDEFGHIJKLMNOP…

0286655757

Eric a

ABC DEFG HIJ

Offic e

Peter

Go to the desired contact and press Answer/Call to dial

out.

Shortcut Key:

Alternatively, press the Enter button in the main idle screen

to instantly access the phonebook’s A-Z index.

_Downlo1_ad6_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Accessing Received, Dialed, and Missed Calls

BT-390 can sync with your mobile phone’s call history. To

access the previously dialed calls please go through the

following steps:

Call History → Calls Dialed

To access received calls

Call History → Calls Received

To access the missed calls:

Call History → Calls Missed

Dialing a Number

To dial a desired telephone number that is not in the

phonebook access the Dial Number function. Go to the

required number and press Enter to type it on the screen.

To delete a wrongly selected number move to Å symbol

and press Enter to delete it. Once the complete telephone

number is selected, press the Answer button to call the

telephone number you have just entered.

Phone Book

1 2 3 4 5 6 7 8

C a ll History

Dia l Number

Settings

0286655757

Initiating Private Calls

A privacy function is available in the BT-390 car kit. The

handsfree feature is disabled when the privacy function is

enabled allowing for the use of the handset during the

conversation.

_{Download from Www.Somanuals.com. All Manuals Search And}1_D7_ownload.

3. Operation

To initiate the private call function, simultaneously press

both scroll buttons on the remote control during a call. Once

activated, press the Answer button once to return to

handsfree.

Warning:

It maybe illegal to use mobile phone while driving. Please

check the law in your region. We do not recommend any

use of mobile phone by driver when driving.

r Connection Settings

Pairing Setup

The majority of the phones can connect with BT-390 under

the hands-free profile as follows:

Settings → Bluetooth Setup → Pairing →

Pairing Phone

Some phones do not support the hands-free profile but

instead offer a headset profile. In this case, you will need to

setup the headset pairing to connect the mobile phone with

BT-390 as follows:

Settings → Bluetooth Setup → Pairing →

Pairing Headset

Disconnecting From the Current Phone

You can disconnect the phone from

the BT-390’s menu:

NOKIA N95

Settings → Bluetooth Setup →

Active Phone → Disconn

Disc onn

Exit

_Downlo1_ad8_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Viewing, Connecting, and Deleting Previously Paired Phones

You can re-establish a connection with a previously paired

phone by entering the paired phone lists:

Settings → Bluetooth Setup → Paired Phone

Note:

To re-establish a connection with a previously paired

device, the connection with current device must be disabled

first.

To re-establish a link please go to the desired device name

and press Conn to re-connect with the BT-390:

Settings → Bluetooth Setup → Paired Phone

→ select the device (e.g. Sony Ericsson K800i)

→ Conn

Sony Eric sson K800i

Nokia N95

Nokia N80

Sony Eric sson K800i

C onn Del Exit

To delete a pairing simply select the desired device name

and scroll to Del and press Enter to confirm the deletion:

Settings → Bluetooth Setup → Paired Phone

→ select the device (e.g. Sony Ericsson K800i)

→ Del

s Language Settings

Language Settings

Depending on your region, there are up to 10 languages

built into the BT-390 and the default language is English. To

_{Download from Www.Somanuals.com. All Manuals Search And}1_D9_ownload.

3. Operation

change to a different language simply follow the following

steps:

Settings → Language Setup → English

Note:

Available languages: English, Spanish, Portuguese,

French, Italian, German, Dutch, Norwegian, Danish,

Swedish (Region 1); English, Czech, Polish, Hungarian,

Russian, Hebrew (Region 2); English, Chinese (Region 3).

t Sound Settings

Adjusting the Speaker Volume

You can adjust the speaker volume to suit your required

sound level:

Settings → Sound Settings → Volume

Settings → + / -

Volume

Disabling and Enabling the Key Tone

You can disable or enable the BT-

390’s key tone:

Key Tone Setting

Ena ble Exit

Settings → Sound Settings →

Key Tone Setting → Enable/Disable

u Display Settings

Adjusting Display Contrast

You can adjust the contrast of the LCD display:

_Downlo2_ad0_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Settings → Display Settings → Contrast → +/-

C ontra st

Adjusting Display Brightness

You can adjust the backlight level of the LCD display:

Settings → Display Settings → Brightness →

+/-

Brightness

Changing the Backlight Color

You can change the color of the backlight to suit your car’s

interior. BT-390 has 5 preset colors to choose from:

Settings → Display Settings → Screen Color

→ White

Available colors: Orange, Green, Blue, Red.

You can also self-define the backlight color as follows:

Settings → Display Settings → Screen Color

→ User Define

_{Download from Www.Somanuals.com. All Manuals Search And}2_D1_ownload.

3. Operation

Enabling Auto Dim Screen

You can enable or disable the backlight to go dim when the

system idle time is longer than 10 seconds:

Settings → Display Settings → Screen Auto

Off → Enable/ Disable

Sc reen Auto Off

Ena ble

Exit

v Other Settings

Setting up Automatic Phonebook Synchronization

You can setup to upload your phonebook automatically

when a connection is established:

Settings → Phone Book Sync → Enable/

Disable

Phone Book Sync

Ena ble

Exit

_Downlo2_ad2_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Finding Out the Device Software & Firmware Version

For information about the device, go to:

Settings → About Car Kit

BT-390

S/W V 2.5AF

BT: 200B009

Device Name

Software Version

Bluetooth Version

w Multimedia Functions

BT-390 has a built-in F.M. transmitter which not only offer

alternative sound output for handsfree communication but

also allows user with A2DP phones to stream music in the

phone to the Hi-Fi radio via car kit.

Setting up FM Transmission

To setup FM frequency, please use the following steps:

Settings → Sound Settings → FM Settings →

F.M. 88.8 (MHz)

Other Frequencies: 100.1MHz, 106.2 MHz, FM User 1, and

FM User 2.

To setup a user defined frequency:

Settings → Sound Settings → FM Settings→

FM User 1 (or FM User 2)

To turn off FM transmitter:

Settings → Sound Settings → FM Settings

→ FM Disable

_{Download from Www.Somanuals.com. All Manuals Search And}2_D3_ownload.

3. Operation

FM User 2

FM Disa ble

To enable or disable handsfree function via FM transmitter:

Settings → Sound Settings → H.F. Out F.M. →

Enable/Disable

HF OUT FM

Ena ble

Exit

Using A2DP Media Player

To enter Media Player interface:

Settings → Sound Settings → Media Player

_Downlo2_ad4_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Use the Media Menu buttons to Play, Pause, jump to

Previous or Next songs, and Stop playing.

Shortcut Key:

Alternatively, press the Up scroll button in the idle screen to

gain access to the media player instantly.

Note:

Phone must support A2DP to use this function. Not all

phones are equipped with A2DP function. Please check

your phone specification for further information.

Text-To-Speech Setting

BT-390 is equipped with the advanced Text to Speech (TTS)

technology which speaks out the menu and car kit’s operations in

real person voice to assist driver operating the car kit while driving

the vehicle.

Setting up Text-To-Speech

To enable or disable TTS Feature:

Settings → Sound Settings → Text to

Speech→ Enable/Disable

Text to Speec h

Ena ble

Exit

_{Download from Www.Somanuals.com. All Manuals Search And}2_D5_ownload.

3. Operation

Factory Settings Reset

BT-390 allows you to master reset the car kit back to the

original factory settings. To master reset BT-390 please

press both Answer and Reject buttons at the same time for

few seconds until you hear a series of beeps and then it will

automatically enter the pairing screen to indicate that car kit

has been reset back to the original factory settings.

Warning:

If you reset the car kit, all phonebook entries and paired

settings will be erased.

Bluetooth Firmware and CPU Software Upgrade

From time to time new Bluetooth phones are introduced

and these phones may not be 100% compatible with BT-

390 as the software may not recognize new features or

functions provided on the new phone. BT-390’s firmware

must be updated to accommodate new phones. BT-390

offers an easy way of upgrading software. To use this

feature please contact your dealer for an upgrade

instruction manual.

Phone Book Sync

About C a r Kit

Firmwa re Upda te

Exit

Disclaimer:

All brands, trademarks and names are the properties of their respective owners.

They are solely used to identify their respective products, and have no

indication of affiliation or relationship.

_Downlo2_ad6_{from Www.Somanuals.com. All Manuals Search And Download.}

3. Operation

Troubleshooting

Make sure the bluetooth

My mobile phone can’t make

a connection.

function on your phone is

enabled.

Make sure the car ignition is on.

If on and no power check

the fuses and wiring.

Reset the Car Kit and try again.

Turn your phone off and on

again,

and

try

the

proceedure for connection

once more.

If your phone is very new check

the support website for an

upgraded software version.

With some phones, adjusting

the volume before the call is

initaited will disconnect the

call. Wait until the call is

answered, then adjust the

volume.

When my mobile phone is

ringing and

adjust the

call is

volume,

the

disconnected.

Re-record voice tags using the

method described in “Notes

on using Voice Recognition”

above.

My phone doesn’t recognize

my voice tags for voice

recognition.

(Note: Not available on all

Close your windows while

using voice recognition.

phones.

phone’s user manual for

Check

your

availability.)

Speak clearly in the same

manner in which the voice

tag was recorded.

_{Download from Www.Somanuals.com. All Manuals Search And}2_D7_ownload.

3. Operation

_Downlo2_ad8_{from Www.Somanuals.com. All Manuals Search And Download.}

Infiniti Network Card WLI CB G300N User Manual
Jenn Air Cooktop CCE1400 User Manual
JVC Camcorder 42PFL8803D User Manual
JVC Speaker CS BB2 User Manual
Kalorik Fryer USK FT 1 User Manual
Key Digital Stereo Amplifier KD DA6 User Manual
KitchenAid Oven KEBI100W User Manual
Kobe Range Hoods Ventilation Hood CX1842GS 8 User Manual
Korg Musical Instrument musical instruments User Manual
Kramer Electronics Switch VS 30FW User Manual