FP734
FP735
instructions
m
u
l
t
i
p
r
o
before using your Kenwood appliance
Read these instructions carefully and retain for future reference.
Remove all packaging and any labels.
before plugging in
Make sure your electricity supply is the same as the one shown
on the underside of your machine.
G
G
G
Important – UK only
safety
G
G
The wires in the cord are coloured as follows:
Blue = Neutral,
Brown = Live.
The appliance must be protected by a 13A approved (BS1362)
fuse.
G
The blades and discs are very sharp, handle
with care. Always hold the knife blade
by the finger grip at the top, away
from the cutting edge, both when
handling and cleaning.
G
G
G
G
Do not lift or carry the processor by the handle - or the handle
may break resulting in injury.
Always remove the knife blade before pouring contents from the
bowl.
Keep hands and utensils out of the processor bowl and liquidiser
goblet whilst connected to the power supply.
Switch off and unplug:
Note:
G
For non-rewireable plugs the fuse cover MUST be refitted when
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED
IMMEDIATELY. An electric shock hazard may arise if an
unwanted non-rewireable pug is inadvertently inserted into a 13A
socket outlet.
G
G
G
before fitting or removing parts
G
after use
G
before cleaning
G
G
G
Never use your fingers to push food down the feed tube. Always
use the pusher/s supplied.
Never fit the blade unit to the power unit without the
liquidiser or mini chopper/mill jar fitted.
Before removing the lid from the bowl or liquidiser or mini
chopper/mill from the power unit:-
This appliance conforms to EC directive 2004/108/EC on
Electromagnetic Compatibility and EC regulation no. 1935/2004
of 27/10/2004 on materials intended for contact with food.
before using for the first time
1 Remove all packaging including the plastic blade covers from the
knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade
during manufacture and transit only.
2 Wash the parts see ‘cleaning’
3 Push excess cord into the back of the machine.
G
switch off;
G
wait until the attachment/blades have completely stopped;
G
be careful not to unscrew the liquidiser goblet or mini
chopper/mill from the blade assembly.
Liquids should be allowed to cool to room temperature before
blending.
Do not use the lid to operate the processor, always use the on/off
speed control.
This machine will be damaged and may cause injury
if the interlock mechanism is subjected to excessive
force.
G
G
G
key
processor
ቢ
ባ
ቤ
ብ
ቦ
ቧ
ቨ
ቩ
ቪ
power unit
detachable drive shaft
bowl
G
G
G
Never use an unauthorised attachment.
Never leave the machine on unattended.
lid
feed tube
pushers
safety interlocks
cord storage
speed control
Never use a damaged machine. Get it checked or repaired: see
‘service and customer care’.
Never let the power unit, cord or plug get wet.
Don’t let excess cord hang over the edge of a table or worktop
or touch hot surfaces.
G
G
G
G
Do not exceed the maximum capacities stated in the
recommended speed chart.
liquidiser
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
Only use the appliance for its intended domestic use. Kenwood
will not accept any liability if the appliance is subject to improper
use, or failure to comply with these instructions.
Misuse of your processor/liquidiser can result in injury.
ቫ
ቭ
ቮ
ቯ
ተ
filler cap
lid
goblet
sealing ring
blade unit
G
G
G
Refer to the relevant section under “using the attachments” for
additional safety warnings for each individual attachment.
2
additional attachments
Not all of the attachments listed below may be included with
your food processor. Attachments are dependent upon the
model variant.
ቱ knife blade
ቲ dough tool
ታ twin beater geared metal whisk
ቴ maxi-blend canopy
ት thick slicing/coarse shredding disc
ቶ thin slicing/fine shredding disc
fine (Julienne style) chipper disc
geared citrus press (if supplied)
mini chopper/mill
mini processor bowl (if supplied)
centrifugal juicer (if supplied)
choosing a speed for all functions
Tool/Attachment
Function
Speed
Maximum Capacities
Knife Blade
One Stage Cake Mix
1 – 8
5 – 8
1 – 5
8
1.5Kg/3lb 5oz Total Wt
340g/12oz Flour Wt
Pastry - rubbing fat into flour
Adding water to combine pastry ingredients
Chopping/pureeing/pates
600g/1lb 6oz Meat
1.5 litres/2pts 12fl. oz
6 Egg Whites
Knife Blade with maxi-blend canopy Soups – start at a low speed and move up to 8
1 – 8
Whisk
Egg Whites
8
Egg & sugar for fatless sponges
Cream
8
5 – 8
500 mls
Dough tool
Yeasted mixes
8
500g/1lb 2oz
Discs – slicing/shredding/chipping
Firm food items such as carrots, hard cheese.
Softer items such as cucumbers, tomatoes
5 – 8
1 – 5
Citrus Press
Citrus fruits
1
8
8
8
8
Mini Bowl & knife
Liquidiser
All processing
All processing
All processing
Fruit & Vegetables
200g/8oz
1.5 litres/2pts 12fl.oz
Mini chopper/mill
Centrifugal juicer
450g/1lb
3
to use your food processor
using the attachments
1 Fit the detachable shaft onto the power unit ᕡ.
2 Then fit the bowl. Place the handle towards the back and turn
clockwise until it locks ᕢ.
ቱ knife blade/ቲ dough tool
The knife blade is the most versatile of all
the attachments. The length of the
processing time will determine the texture
achieved. For coarser textures use the
pulse control.
3 Fit an attachment over the drive shaft.
G
Always fit the bowl and attachment onto the machine before
adding ingredients.
4 Fit the lid ᕣ - ensuring the top of the drive shaft locates into the
ቱ
centre of the lid.
Do not use the lid to operate the processor, always
use the on/off control.
5 Switch on and select a speed.
The processor won’t work if the bowl and lid are fitted
incorrectly.
Use the pulse (P) for short bursts. The pulse will operate for as
Use the knife blade for cake and pastry
making, chopping raw and cooked meat,
vegetables, nuts, pate, dips, pureeing
soups and to also make crumbs from
biscuits and bread. It can also be used for
yeasted dough mixes if the dough tool is
not supplied.
G
G
G
ቲ
long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments and
bowl.
Use the dough tool for yeasted mixes.
hints
G
Always switch off before removing the lid.
knife blade
G
Cut food such as meat, bread, vegetables
into cubes approximately 2cm/ ⁄4in before
processing.
Biscuits should be broken into pieces and added down the feed
tube whilst the machine is running.
important
3
G
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures avoid
contact with the plastic as this may result in permanent marking.
G
G
G
G
G
When making pastry use fat straight from the fridge cut into
3
2cm/ ⁄4in.cubes.
to use your liquidiser
1 Fit the sealing ring ቯ into the blade unit ተ - ensuring the seal is
located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the goblet onto the blade unit.
3 Put your ingredients into the goblet.
Take care not to over-process.
dough tool
Place the dry ingredients in the bowl and add the liquid down the
feed tube whilst the machine is running. Process until a smooth
elastic ball of dough is formed this will take 60 - 90 secs.
Re-knead by hand only. Re-kneading in the bowl is not
recommended as it may cause the processor to become unstable.
G
4 Put the filler cap in the lid, then turn.
5 Turn the lid in a clockwise direction to lock onto the goblet.
6 Place the liquidiser onto the power unit and turn to lock ᕤ.
7 Select a speed or use the pulse control.
ታ twin beater geared whisk
Use for light mixtures only eg egg whites, cream, evaporated milk
and for whisking eggs and sugar for fatless sponges. Heavier
mixtures such as fat and flour will damage it.
G
Allow all liquids to cool to room temperature before
placing them in the liquidiser.
hints
using the whisk
G
When making mayonnaise, put all the ingredients, except the oil into
1 Fit the drive shaft and bowl onto the power unit.
the liquidiser. Then with the machine running, pour the oil into the
filler cap and let it run through.
2 Push each beater securely into the drive
ታ
G
head
.
Thick mixtures, eg pates and dips, may need scraping down. If it’s
3 Fit the whisk by carefully turning until it
drops over the drive shaft.
4 Add the ingredients.
difficult to process, add more liquid.
When crushing ice use the pulse in short bursts.
To ensure the long life of your liquidiser, never run it for longer than
G
G
5 Fit the lid - ensuring the end of the shaft
locates into the centre of the lid.
6 Switch on.
60 seconds. Switch off as soon as you’ve got the right consistency.
Don’t process spices - they may damage the plastic.
The machine won’t work if the liquidiser is fitted incorrectly.
G
G
G
important
The whisk is not suitable for making one-
stage cakes or creaming fat and sugar as
these mixes will damage it. Always use the
knife blade for cake making.
Don’t put dry ingredients into the liquidiser before switching on. If
necessary, cut them into pieces; remove the filler cap; then with
the machine running, drop them through one by one.
G
G
Don’t use the liquidiser as a storage container. Keep it empty
before and after use.
Never blend more than 1 ⁄2 litres (2pts 12floz) - less for frothy
1
G
hints
liquids like milkshakes.
G
Best results are obtained when the eggs are at room temperature.
G
Ensure the bowl and whisks are clean and free from grease before
whisking.
4
hints
Use fresh ingredients
ቴ maxi-blend canopy
When blending liquids, use the maxi-blend
canopy with the knife blade. It allows you
to increase the liquid processing capacity
from 1 litre to 1.5 litres, prevents leaking
and improves the chopping performance
of the blade.
G
G
ቴ
Don’t cut food too small. Fill the width of the large feed tube
fairly full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
When using the chipper disc, place ingredients horizontally.
When slicing or shredding: food placed upright
shorter than food placed horizontally
G
G
comes out
.
G
1 Fit the drive shaft and bowl onto the
power unit.
There will always be a small amount of waste on the plate or in
the bowl after processing.
2 Fit the knife blade.
3 Add ingredients to be processed.
4 Fit the canopy over the top of the blade
ensuring it sits on the ledge inside the bowl
. Do not push down on the
canopy, hold by the centre grip.
5 Fit the lid and switch on.
m
u
lt
i
p
r
o
slicing/shredding discs
reversible slicing/shredding
discs - thick ት, thin ቶ
Use the shredding side for cheese,
carrots, potatoes and foods of a similar
texture.
ት
Use the slicing side for cheese, carrots,
potatoes, cabbage, cucumber,
courgette, beetroot and onions.
m
m
u
u
l
t
lt
i
i
p
p
ro
r
o
ቶ
fine (Julienne style) chipper disc
Use to cut: potatoes for Julienne style
French fries; firm ingredients for salads,
garnishes, casseroles and stir fries (eg
carrot, swede, courgette, cucumber).
citrus press (if supplied)
Use the citrus press to squeeze
ቢ
the juice from citrus fruits (eg
oranges, lemons, limes and
grapefruits).
safety
ባ
G
Never remove the lid until the cutting disc has
completely stopped.
ቢ
ባ
cone
sieve
G
Handle the cutting discs with care - they are
extremely sharp
to use the citrus
press
to use the cutting discs
1 Fit the drive shaft and bowl
onto the power unit.
1 Fit the drive shaft and bowl onto the
power unit.
2 Fit the sieve into the bowl -
ensuring the sieve handle is
locked into position directly over
2 Holding by the centre grip
the disc onto the drive shaft with the
appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you
want to use. The pusher contains a
smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube - first put
the large pusher inside the feed tube.
To use the large feed tube - use both
pushers together.
, place
.
m
u
l
t
i
p
r
o
the bowl handle
3 Place the cone over the drive
shaft turning until it drops all the way down
.
.
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
G
The citrus press will not operate if the sieve is not
m
u
locked correctly.
l
t
i
p
r
o
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube.
5
mini chopper/mill
mini processor bowl (if supplied)
Use the mini chopper/mill for milling herbs,
nuts and coffee beans.
Use the mini processor bowl to
chop herbs and process small
quantities of ingredients e.g.
meat, onion, nuts, mayonnaise,
vegetables, purées, sauces
and baby food.
ቢ
ባ
ቢ
ባ
ቤ
ብ
blade unit
sealing ring
jar
mill lid
ቢ
ባ
mini processor knife blade
mini processor bowl
safety
ቢ
ባ
G
Never fit the blade unit to your food processor
to use the mini
processor bowl
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the mini processor bowl -
ensuring the ribs on the inside
of the mini bowl chimney align
with the slots in the main bowl
chimney
3 Place the knife blade over the
drive shaft
without the jar fitted.
ቤ
G
G
G
Never unscrew the jar while the mini
chopper/mill is fitted to your appliance.
Do not touch the sharp blades – Keep the
blade unit away from children.
Never remove the mini chopper/mill until
the blades have completely stopped.
ብ
important
G
To ensure the long life of your mini chopper/mill,
never run for longer than 30 seconds. Switch off
as soon as you have got the right consistency.
The processing of spices is not recommended as
they may damage the plastic parts.
The appliance will not work if the mini
chopper/mill is incorrectly fitted.
Use for dry ingredients only.
.
.
G
G
G
4 Add the ingredients to be
processed.
5 Fit the lid and switch on.
m
u
l
t
i
p
r
o
safety
G
Never remove the lid until the knife blade has completely
stopped.
G
The knife blade is very sharp - always handle with care.
to use your mini chopper/mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar until
it is finger tight.
important
G
G
Don’t process spices – they may damage the plastic.
Don’t process hard food such as coffee beans, ice cubes or
chocolate – they may damage the blade.
hints
G
G
Herbs are best chopped when clean and dry.
Always add a little liquid when blending cooked ingredients to
make baby food.
5 Place the mini chopper/mill onto the
power unit and turn to lock
6 Switch on to maximum speed or use
the pulse control.
.
G
G
Cut foods such as meat, bread, vegetables into cubes
approximately 1-2 cm ( ⁄2 – ⁄4 in) before processing.
When making mayonnaise add the oil down the feed tube.
m
u
l
1
3
t
i
p
r
o
hints
G
Herbs are best milled when clean and dry.
6
care & cleaning
centrifugal juicer (if supplied)
Use the centrifugal juice for making
juice from firm fruit and vegetables.
G
Always switch off and unplug before cleaning.
G
Handle the blades and cutting discs with care - they are
extremely sharp.
Some foods may discolour the plastic. This is perfectly normal
and won’t harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
ቢ
ባ
ቢ
ባ
ቤ
ብ
pusher
lid
strainer
inner bowl
G
power unit
G
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
Store excess cord in the storage
area at the back of the
to use the centrifugal
juicer
1 Fit the drive shaft and bowl onto the
power unit.
2 Lock the strainer into the inner bowl
.
3 Fit the inner bowl into the processor
G
ቤ
ብ
machine
.
bowl
.
4 Place the attachment lid onto the bowl,
turn until it locks and the feed tube sits
over the handle
.
5 Cut the food into small pieces to fit the
feed tube.
6 Switch on and push down evenly with
the pusher - never put your
fingers in the feed tube. Process
fully before adding more.
7 After adding the last piece, let the
machine run for a further 20 seconds
to extract all the juice from the strainer.
liquidiser and mini chopper/mill
1 Empty the goblet/jar before unscrewing it from the blade unit.
2 Wash the goblet/jar by hand.
m
u
lt
i
p
r
o
3 Remove and wash the seals.
4 Don’t touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
important
G
If the processor vibrates, switch off and empty the strainer (The
processor vibrates if the pulp becomes unevenly distributed).
Process small amounts at a time (450g maximum) and empty
the strainer and inner bowl regularly.
Before processing remove stones and pips (eg pepper, melon,
plum) and tough skins (eg melon, pineapple). You don’t need to
peel or core apples and pears.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry.
G
G
G
G
Do not immerse the drive head in water.
all other parts
Wash by hand, then dry.
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
G
hints
G
G
G
Use firm, fresh fruit and vegetables.
Citrus juice will be bitter and frothy because its peel and pith get
processed too. Use the citrus juicer instead.
7
service and customer care
G
If the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
UK
If you need help with:
G
Using your machine
G
Servicing or repairs (in or out of guarantee)
టcall Kenwood on 023 92392333 and ask for customer care.
Have your model number ready - it’s on the underside of
the processor.
G
spares and attachments
టcall 0844 557 3653.
other countries
Contact the shop where you brought the food processor.
G
Designed and engineered by Kenwood in the UK
G
Made in China
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
guarantee UK only
If your food processor goes wrong within one year from the date
you bought it, we will repair or replace it free of charge provided:
G
you have not misused, neglected, or damaged it;
G
it has not been modified (unless by Kenwood);
G
it is not second hand;
G
it has not been used commercially;
G
you have not fitted a plug incorrectly; and
G
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
8
recipes
victoria sandwich
shortcrust pastry
300g (12oz) plain flour
150g (6oz) Soft margarine
150g (6oz) caster sugar
150g (6oz) self raising flour
5mls (1tsp) baking powder
3 eggs
150g (6oz) mixture of lard and margarine cut into small pieces
1
2.5 mls ( ⁄2 tsp) salt
45mls (3tbsp) cold water
15mls (1tbsp) warm water
filling & decoration
3tbsp strawberry jam
1 Fit the knife blade and add the flour, salt and fat. Process for
approximately 10 seconds or until the mixture looks like coarse
breadcrumbs.
1
150mls ( ⁄4pt) double cream whipped (optional)
2 Then add the water down the feed tube until the mixture looks
like it is about to stick together.
3 Turn out the mixture onto a worksurface and shape by hand.
Use as required.
1tbsp icing sugar or caster sugar
1 Pre-heat the oven to 180°C/350°F/Gas mark 4 and grease two
18cm(7”) shallow cake tins.
2 Fit the knife blade. Place all the ingredients for the sponge in the
bowl and process for 5 seconds. Using a spatula, scrape the
mixture into the centre of the bowl and process for a further 5
seconds.
G
For best results allow the pastry to rest before use. Place in a
plastic bag or wrap in clingfilm and chill in the fridge for 20
minutes.
3 Pour the mixture into the prepared tins and bake for 20-25
minutes or until firm to a light touch and coming away from the
edges slightly. If you are unsure whether the cake is cooked
insert a thin skewer in the centre and it should come out clean.
Turn out onto a wire cooling rack.
meringues
4 egg whites
200g (8oz) caster sugar
1 Whisk the egg whites until stiff.
2 Add half the sugar and continue to whisk until the mixture is
glossy.
4 When cool spread the jam and cream over one of the cakes,
top with the other cake and sprinkle with the sugar.
3 Remove the whisk and carefully fold in the remaining sugar with
a metal spoon.
fruit cake
4 Pipe the mixture onto trays lined with non-stick baking paper.
5 Bake in a pre-heated oven at 110°C/225°F/Gas mark ⁄4 for
about 4 - 5hours until firm and crisp. If they start to brown, leave
the door slightly ajar.
125g (5oz) block margarine (cut into cubes)
125g (5oz) caster sugar
2 eggs
80 - 100mls (5-6tbsp) milk
275g (11oz) mixed fruit
200g (8oz) self raising flour
5mls (1tsp) mixed spice
1
lasagne
300g (12oz) braising steak, cubed.
400g can of tomatoes
30mls (2tbsp) tomato puree
1 onion
1 Fit the knife blade and place the cubed margarine and sugar in
the bowl.
2 Mix until smooth, light and fluffy, scraping down as necessary.
3 Add the eggs one at a time.
5mls (1tsp) basil
100g (4oz) lasagne
200g (8oz) mozzarella cheese
15mls (1tbsp) oil
4 Add the flour, spices and milk. Pulse until ingredients combined.
5 Add the fruit using the pulse.
6 Pour the mixture into a greased and lined 7”/18cm round cake
tin. Bake in a preheated oven 150°C/300°F/Gas Mark 2 for
approximately 2 hours or until cooked. Turn out of the tin when
cool.
salt and pepper
1 Grate the cheese using the shredding disc.
2 Then separately chop the meat and onions with the knife blade.
3 Pre-heat the oil and fry the onions until softened, add the meat
and fry until brown.
whisked sponge
4 Then add the tomatoes, tomato puree and seasonings.
5 Stir well, cover and simmer gently for about 40minutes.
6 Cook the lasagne in plenty of salted boiling water until tender.
Then drain well.
7 Place layers of meat, lasagne and cheese in a 1litre/2pint oven
proof dish. Finish with a layer of cheese.
3 eggs
75g/3oz caster sugar
75g/3oz plain flour (sieved twice)
1 Fit the twin beater geared whisk and add the sugar and eggs
into the bowl.
2 Whisk until the mixture is thick and leaves a trail.
3 Fold the flour in carefully by hand using a metal spoon.
4 Pour the mixture into a deep lined and greased 7”/18cm cake
tin. Bake in a preheated oven at 190°C/375°F/Gas Mark 5 for
approximately 25minutes or until the cake springs back when
touched.
8 Bake at 190°C/375°F/Gas Mark 5 for 30minutes or until golden
and bubbling.
5 Remove from the tin and cool on a wire rack.
9
white bread
honey and nut spread using the mini
chopper/mill
500g(1lb 2oz) strong white bread flour
5mls (1tsp) salt
340g clear honey at room temperature
10g chopped nuts
1
15g( ⁄2oz) lard
1
15g ( ⁄2oz) fresh yeast or 10mls(2tsp) dried yeast + 5mls (1tsp)
caster sugar.
1 Place the ingredients into the mini chopper/mill in the above
order.
2 Fit the mini chopper/mill to the power unit and allow the
ingredients to settle to the bottom before processing.
3 Blend together using the pulse for 5seconds.
4 Use as required.
1
300mls (11fl oz) warm water, 100mls (3 ⁄2 fl oz) boiling water to
1
200mls (7 ⁄2 fl oz) cold water
1 Dried yeast (the type that needs reconstituting): Add
the yeast and sugar to the warm water. Leave to stand for 5 - 10
minutes until frothy.
Fresh yeast: crumble into the flour
Other types of yeast: follow the manufacturer’s instructions.
2 Fit the dough tool or knife blade and add the flour (with fresh
yeast if used), salt and lard. Process for a few seconds to evenly
distribute the ingredients.
3 Then with the motor running quickly pour the liquid in a steady
stream down the feed tube until the mixture forms an elastic soft
dough. This will take about 60 - 90 seconds.
4 Remove the dough, place in a bowl, cover with an oiled piece of
clingfilm or a plastic bag, and leave in a warm place for 45 - 60
minutes or until doubled in size.
5 Re-knead by hand for 2 - 3 minute. Re-kneading in the
bowl is not recommended as it may cause the
processor to become unstable. Shape into a loaf or 15
rolls and place on greased baking trays and leave until double in
size.
6 Then bake in a pre-heated oven at 230°C/450°F/Gas mark 8 for
20 - 25 minutes for the loaf or 10 - 15 minutes for bread rolls.
When ready they should sound hollow when tapped on the
base.
carrot and coriander soup
25g (1oz) butter
1 onion chopped
1 clove garlic crushed
700g (1lb 10oz) carrot cut into 1 cm cubes
cold chicken stock
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add the onion and garlic and fry until
soft.
2 Place the carrot into the liquidiser, add the onion and garlic. Add
sufficient stock to reach the 1.5L level marked on the goblet. Fit
the lid and filler cap.
3 Blend on maximum speed for 5 seconds for a coarse soup or
longer for a finer result.
4 Transfer the mixture to a saucepan, add the coriander and
seasoning and simmer the soup for 30 to 35 minutes or until
cooked.
5 Adjust the seasoning as necessary and add extra liquid if
required.
10
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
116748/2
|
Infiniti Speaker Beta C250 User Manual
Infinity Car Speaker 402CS User Manual
Insignia Digital Photo Frame NS DPF0812W User Manual
Insignia Handheld TV NS 7HTV User Manual
Intel Computer Hardware 8S661FXM RZ User Manual
Intel Server S875WP1 E User Manual
Kenwood Speaker KSC 8803 User Manual
KitchenAid Oven KEBC147VBL00 User Manual
KitchenAid Toaster KTT220 User Manual
Kompernass Toaster KH 1128 User Manual