OWNER'S MANUAL
ANTI-SHOCK CD / MP3 PLAYER
CD CHANGER CONTROL
AUXILIARY INPUT
SUPER POWER OUTPUT
ANTI-THEFT FLIP DOWN DETACHABLE FACE
FM/AM BAND RADIO RECEIVER
REMOTE CONTROL
MODEL: PLCD68MP3
P / N : 570-F78902-01
SETTING CLOCK TIME MANUALLY
ꢀ Briefly press CLK button until clock time appear on the display.
ꢀ Press and hold the button until the clock flash and release CLK button.
ꢀ While clock is flashing, rotate volume control button clockwise to set HOUR and
anti-clockwise to set MINUTE.
8. MUTE CONTROL
Press the button to mute volume control and “MUTE ON” will appear on the display.
9. DISC EJECT BUTTON
Press the button to eject the disc inside disc slot.
10. PANEL RELEASE BUTTON (FIGURE A)
To detach the front panel, press the release button so that the panel fold down from
vertical position to horizontal position and then pull it off of the chassis at horizontal
position.
To re-attach the panel, push the fold-down metal frame forward until it locks to the
original postion. Then, put the panel at the right side of the position first and then press
the left side of the panel until the mechanism lock it into place.
11. MODE SELECTION
Press this button to select Radio (TUNER), CD / MP3 (S-CDP), CD Changer Control
(CD-C) and Auxilliary Input (AUX) mode.
12. STEREO/MONO CONTROL
Press this button to select “STEREO” or “MONO” reception.
13. LOUD CONTROL
Press this button to activate the loudness circuitry which compensates for loss of high
and low frequencies during low volume levels.
14. LOCAL/DISTANT CONTROL
Press this button to prevent strong local stations from overlapping weaker stations. For
normal operation, press this button again for distance.
15. VOLUME / SELECTION CONTROL
Rotate the button anti-clockwise to decrease, or clockwise to increase volume level.
AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER)
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
ꢀ VOLUME - Press this button once, then rotate anticlockwise to decrease, or clockwise to
increase volume level.
ꢀ BASS - Press this button once, then rotate anticlockwise to decrease, or clockwise to
increase bass level.
ꢀ TREBLE - Press this button once, then rotate anticlockwise to decrease, or clockwise to
increase treble level.
ꢀ BALANCE - Press this button once, then rotate anticlockwise or clockwise to level balance
of speaker right and left.
ꢀ FADER - Press this button once, then rotate anticlockwise or clockwise to level fader of
speaker front and rear.
AUDIO / SETTING SELECT (WHEN PUSHING 2 SECONDS)
When pressing the button for more than 2 seconds, it activates as unit setting selection in
cyclical mode as following. The unit setting can be changed byrotating the button clockwise or
anti-clockwise.
ꢀ DSP OFF / POP M / ROCK M / CLASS M / FLAT M
ꢀ ESP 12 / ESP 45 (setting 12 seconds or 45 seconds of electronic anti-shock time
for Audio CD)
ꢀ BEEP OFF / BEEP ON (not available for this model)
ꢀ SEEK 1 (tune up/down buttons performs fast tune function) / SEEK 2 (tune up/down buttons
performs auto tuning function when pressed more than 1 second)
ꢀ COLOR 1 / COLOR 2 (not available for this model)
ꢀ VOL LAST / VOL ADJ (preset volume level when unit turn on)
Page. 3
P / N : 570-F78902-01
16/17. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On radio mode, press the button will tune one frequency step higher or lower. Pressing
the button more than 1 second can performs fast tuning function or auto tuning function.
On CD/MP3/CDC mode, press this button will locate the beginning of the track being
played or will locate the beginning of the next track. When pressing more than 2
seconds, it will move fast forward or fast backward to a specific position of a CD/MP3
track.
18. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you
may wish to recall. Each preset button can store FM1, FM2, FM3, MW1, MW2 station
frequency. Pressing the button momentarily recalls the station frequency which was
memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW.
NOTE: When the preset button to be memorized is kept pressed for more than 2
seconds, the receiving station frequency will be stored in the button pressed. After this,
the memorized station can be recalled by pressing the button once.
On CD / MP3 / CDC Mode
ꢀ Preset 1 - press this button to pause the disc played.
ꢀ Preset 2 - press this button to scan the first 10 seconds of all the tracks on the
currently selected disc.
ꢀ Preset 3 - press this button to repeat the current track of the disc.
ꢀ Preset 4 - press this button to play disc at random order - Disc shuffle play.
ꢀ Preset 5 - press this button to search previous disc numbers (for CDC Mode only).
- press this button to search -10 track (for MP3 Mode only).
ꢀ Preset 6 - press this button to search the disc numbers ahead (for CDC Mode only).
- press this button to search +10 track (for MP3 Mode only).
INSTRUCTION TO PLAY MP3 SONGS
IMPORTANT NOTES
• The MP3 file recording media acceptable to this unit are CD-R and CD-RW.
• TheMP3 formatsacceptablearelimited.
• Donot attempttoplayamediacontainingnon-MP3filesornon-MP3 fileswithMP3extension. Otherwise, the CD
Mechanism will not be working properly. If “ERROR” is shown, it is suggested to reset the radio by presssing the
resetbutton.
PLAY ON MP3 SONG
• Insert the media with MP3 song in the disc slot. The unit will start playing and checks all the files and folder on
themedia.
• If MP3 files and directories are recognized, the media will start playing.
• The MP3 files and directories are accessed according to the order written by the CD writer.
TRACK SEARCH
• Press “AMS” button once and “Track srch” will be shown on the display.
• Press“SEL”toentertracksearchmodeand“Track001”willappearonthedisplayforyoutoentertracknumber.
• Rotatevolumecontrolbuttonclockwiseoranti-clockwisetoshiftnumber0–9inlooprotation.
• Press“SEL”shortlytoselectthefirstdigit.
• Repeatthesameproceduretoentertheotherdigitsifrequired.
• Afterthetracknumberisselected, press“SEL”buttonmorethan2secondstostartplayingtheselectedtrack.
• If tracknumberisnotentered within10seconds, theunit willcontinue playingthecurrentfile.
FILES SEARCH
• Press “AMS” button twice and “File srch” will be shown on the display
• Press“SEL”toenterfilesearchmode.
• Rotatevolumecontrolbuttonclockwiseoranti-clockwisetoviewthedirectories.
• Aftertheselecteddirectoryisselected, rotatevolumecontrol eitherclockwideoranti-clockwisetoviewthefiles.
• Press“SEL”toplaytheselectedfile.
• Ifdirectoriesorfilesnameisnotenteredwithin10seconds, theunitwillcontinueplayingthecurrentfile.
Page. 4
P / N : 570-F78902-01
CHARACTER SEARCH (OPTIONAL)
• Press “AMS” button 3 times and “Char srch” will be shown on the display.
• Press“SEL”toenterintocharactersearchmodeand“A”willappearonthedisplayforyoutoenterfirstcharacter.
• Enterwholenameoffiles(maximum8characters)byRotatingvolumecontrolbuttonclockwiseoranti-clockwiseto
shift“A-Z”,“0-9”&“ ”(space)inlooprotation.
• Press“SEL”shortlytoselectthefirstcharacter.
• Repeatthesameproceduretoentertheothercharactersifrequired.
• Afterthewholenameoffileisentered, press“SEL”buttonmorethan2secondstostartplayingtheselectedtrack.
Remark :
1)ThemediamustcontaindirectoriesorfilesnamewrittenbytheCDwriterinordertouseinsearching.
2)Ifonlypartiallettersareenteredforsearchingeitherindirectoriesorfilesname, youmaynotgetitcorrectly.
WIRE CONNECTION
CAUTION :
Do not connect the speaker wires to chassis or car body. Each speaker wire cannot be soldered together with
other wires. Otherwise, the unit will be damaged and no sound will come out anymore.
The RESET button is located on the front
RESET FUNCTION
of main panel. It is recessed in order to
prevent accidental engagement, and can
be activated with the tip of a ball-point pen
or any similar pointed object. This reset
circuitry is provided in order to protect the
unit's microprocessor, and should only be
activated under the following conditions :
a) Initial installation after all wiring is
completed.
b) Abnormal operation is encountered such
as numerical indication on display is
erratic.
c) Whenever the reset button is activated,
all preset memory content will be erased
and must be reprogrammed.
Page. 5
P / N : 570-F78902-01
INSTALLATION
REMOTE CONTROL
CAUTION : DO NOT PLACE
THE UNIT OVER THE
MAXIMUM INSTALLATION
ANGLE OF 30°. OTHERWISE,
THE UNIT MAY NOT WORK
PROPERLY.
WARNING!!
Due to protection of CD Mechanism, two small
screws on the top of the unit must be released
before operate the unit. Otherwise, the CD
Mechanism can not be working properly.
UNIT REMOVAL
1. Remove Front Control Panel.
2. Slightly insert the key into the slot and
gently to release.
3. Separate the sleeve from the unit. Keep
release key in a safe place as you may
need for future removal of unit.
P / N : 570-F78902-01
Page. 6
P / N : 570-F78902-01
|