Philips DVR HTR5204 User Manual

Connect  
Set up  
Enjoy  
1
2
3
About the Time Shift Buffer  
(TSB)  
Connecting Recorder and AV  
Receiver  
Finding the viewing channel  
Install the GUIDE Plus+ system  
C
Connecting Speakers and radio  
antennas to AV Receiver  
Connecting Recorder and TV  
C
A
B
A
A Press 2 STANDBY-ON on the recorder.  
B Turn on the TV.  
Once you turn on the recorder, the selected TV  
programme will be stored in a temporary hard disk  
storage called Time Shift Buffer ‘TSB’. The TSB’ can  
store up to 6 hours of programmes temporarily.  
You should see the installation menu.  
SUBWOOFER  
FRONT CENTRE  
Television ( rear)  
Menu Language  
Y
P
B
English  
Please select your language.  
Defines the languages of all  
on-screen menu displays.  
L
Dansk  
Deutsch  
Español  
Français  
Italiano  
REAR  
RIGHT  
REAR  
LEFT  
Press INFO to display the Time Shift video bar.  
FRONT  
RIGHT  
FRONT  
LEFT  
Follow the on-screen instructions to select your  
language, country and enter the postal code of your  
area.  
P
z
R
R
Start time of the  
programme  
Programmes  
stored in the ‘TSB’  
Nederlands  
AUDIO  
AUDIO OUT  
COAXIAL  
DIGITAL OUT  
Norsk  
Note If no or wrong postal code is entered, it will  
cause no GUIDE Plus+ (EPG) service information.  
C In case you don’t see the recorder’s setting menu,  
Now  
Philips Recorder (rear)  
press the Channel Down button on the TVs remote  
22:04:30  
CVBS OUT  
Y
P
B
control repeatedly (or AV, SELECT,  
you see the menu. This is the correct viewing  
channel for the recorder.  
button) until  
°
L
EXT1  
TO TV  
EXT2  
TO VCR/SAT  
Selected clips for  
recording  
TV-OUT  
ANTENNA-IN  
P
R
Present time  
R
MAINS  
S-VIDEO OUT  
VIDEO OUT  
AUDIO  
AUDIO OUT  
COAXIAL  
DIGITAL OUT  
Load the TV listing data  
D
A Press TIMER (GUIDE Plus+) to exit GUIDE Plus+  
system.  
Current time  
of playback  
AM/MW loop  
antenna  
Philips Recorder (rear)  
CVBS OUT  
Y
P
B
L
E
EXT2  
TO VCR/SAT  
Notes:  
T
ANTENNA-IN  
P
R
R
Leave the recorder in ‘standby’ mode and turn ‘on’  
the set-top box overnight to collect the TV listing  
data, this may take up to 24 hours.  
- The contents in the time shift video bar will be  
cleared when you press STANDBY ON (2).  
- The blue LED on the recorder will be lit up when the  
Time Shift Buffer is active or when you playback a  
recording from the hard disk drive.  
12 mm  
S-VIDEO OUT  
VIDEO OUT  
AUDIO  
AUDIO OUT  
COAXIAL  
DIGITAL OUT  
AM/  
Start initial installation  
Use the recorder’s remote control and follow the on-  
screen instructions to complete the installation.  
B
C
A
Antenna  
Philips AV  
Receiver (rear)  
Note If you tune to your Host Channel before going  
to ‘standby’ mode, this recorder will start downloading  
the TV listings data immediately.  
AM/  
A Select the desired menu language, your country and  
A
Cable TV/  
Satellite Receiver  
the TV shape.  
B Check the { Editor } screen the next day to ensure  
the source and programme numbers are matching for  
all channels.  
Philips AV  
Receiver (rear)  
Note Press OK or the Green button on the  
remote control to go to the next screen.  
FM antenna  
Watch TV – Pause live TV  
Your Philips Recorder allows you to control the TV  
programme. You can PAUSE it as if you were in control  
of the live broadcast.  
TO VCR  
TO TV  
B
B Press OK to start automatic analogue channel  
search.  
Turn on the AV Receiver and fine-  
tune the speakers  
F
Channel search  
Start Auto search  
This connection enables you to hear the recorder  
playback from the AV Receiver. It supports multi-  
channel surround sound output.  
A Unplug the existing antenna cable from your TV and  
connect it to the ANTENNA IN socket on the  
recorder.  
A
Connect the various coloured plugs from the  
speakers and subwoofer to the same coloured  
sockets on the AV Receiver.  
A Turn on your recorder to the live TV mode and  
press P +/- to select a TV programme.  
A Press 2 STANDBY-ON on the AV Receiver.  
To hear recorder playback from the AV Receiver,  
B Connect the FM antenna to the inner pin of the  
FM 75 socket. Extend the antenna for optimum  
reception.  
z
z
If you have a Cable Box or Satellite Receiver,  
connect a scart cable from the EXT2-TO VCR/  
SAT scart socket on the recorder to the SCART  
(TO VCR) socket on the Cable Box/Satellite  
Receiver.  
Connect the coaxial cable (supplied) between the  
COAXIAL OUT socket on the recorder and  
COAXIAL IN socket on the AV Receiver.  
z
If you cannot hear the playback from the recorder,  
press SOURCE on the AV Receiver repeatedly until  
‘COAX IN’ appears on the display panel.  
turn on the AV Receiver. If no sound, press  
SOURCE repeatedly to change the input source  
mode for the AV Receiver to ‘COAX IN’.  
z
Previous  
Skip  
C Unfold the AM/MW loop antenna and fix the claw  
into the slot. Push the tabs and insert the wires into  
the AM/MW sockets.  
C Once complete, press the Green button to  
B Press PAUSE LIVE TV to suspend it.  
C Press PAUSE LIVE TV again to continue.  
D To return to live broadcast, press LIVE TV.  
To adjust or fine-tune the speaker settings  
continue.  
LIVE TV  
Note The antenna connection may not be required,  
depending on the capabilities of your Cable Box /  
Satellite Receiver. Refer to its user manual for more  
information.  
B Press and hold PROGRAM on the AV Receiver for  
D Enter the correct time in the entry field, press OK  
followed by the Green button to continue.  
Proceed the same for date entry.  
more than five seconds.  
Note Keep the antennas away from the electronic  
devices to prevent unwanted interference.  
C Press .or > to toggle between ‘CENTER  
DELAY’, ‘REAR DELAY’, ‘TEST TONE’ and ‘EXIT’  
setting options.  
D Plug in the power cable from the AV Receiver to an  
B Connect an RF antenna cable (supplied) from the  
TV-OUT socket on the recorder to the  
E To continue with the GUIDE Plus+ installation,  
AC power outlet.  
PAUSE LIVE TV  
About the internal hard disk  
drive  
This recorder’s hard disk drive can be used as a Media  
Jukebox, allowing you to store and playback your TV  
programmes, videos, music and photos files.  
press the Green button.  
D Press PROGRAM to select an option.  
Antenna In socket on the TV.  
Otherwise, press the Red button to skip.  
E Rotate the VOL control to scroll through the  
various delay time options, then press PROGRAM  
to confirm your setting.  
z
HOME  
C Connect a scart cable (supplied) from the  
EXT1-TO TV scart socket on the recorder to the  
SCART socket on your TV.  
Repeat steps 3~5 for other settings options.  
z
D Plug in the power cable from the recorder to an AC  
SOURCE  
F To exit the speaker setting mode, press .or >  
power outlet.  
TIMER  
GUIDE Plus+  
Press HOME on the remote control to access your  
contents stored in the { Hard Disk }.  
until ‘EXIT’ appears.  
Note Refer to the accompanying User Manual for  
other possible connections.  
 

Pentax Digital Camera Optio S50 User Manual
Perreaux TV Mount SM5 User Manual
Philips Camcorder SGC2909 User Manual
Philips TV Receiver DSR2000 User Manual
Pioneer Blu ray Player BDP LX52 User Manual
Pioneer DVD Recorder DVR X162Q User Manual
Pioneer Home Theater Screen PDP 502MX User Manual
Planar Car Video System PXL2471MW User Manual
Planet Technology Network Router WAP 1963A User Manual
Polycom DVD Player DVD 729 User Manual