™
™
Blackwire® C710M /C720M
®
Corded USB headset with Bluetooth
User guide
TM
Welcome
Congratulations on purchasing your new Plantronics product. This user guide contains
instructions for setting up and using your Blackwire C710M/C720M Bluetooth headset.
Please refer to the separate safety instructions for important product safety information prior
to installation or use of the product.
Blackwire C710M/C720M next generation technology.
™
Featured highlights and Smart Sensor technology:
• Auto answers calls by simply putting on your headset.
• Auto transfers calls between mobile phone and headset.
• Softphone presence can be automatically updated.
• Integrated A2DP (Advanced Audio Distribution Profile for Bluetooth) lets you listen to media audio.
• Voice prompts announce power on/off, battery level, connection status, and more.
System Requirements
Computer
• Supported Operating Systems:
Windows XP®SP3 or later,
Windows Vista® SP1 or later,
Windows® 7 SP1 or later recommended
MAC OS X 10.6.8 or later
• Processor: 400 MHz Pentium® processor or equivalent (Minimum); 1 GHz Pentium processor or
equivalent (Recommended)
• RAM: 96 MB (Minimum); 256 MB (Recommended)
• Hard Disk: 280 MB (Minimum); 500 MB (Recommended)
Browser
• Internet Explorer® V6 or better must be on the user’s system (Required)
Registering your product online
Visit plantronics.com/productregistration to register your product online
so we can provide you with the best possible service and technical support.
Technical assistance
Visit our web site at plantronics.com/support for technical support including frequently asked
questions, compatibility and accessibility information.
3
What’s in the package
OR
2
1
3
4
1 Blackwire C710M Headset with inline controller (monaural) or
2 Blackwire C720M Headset with inline controller (stereo)
3 Blackwire C710M/C720M USB cable
4 Carrying case
4
Headset features
3
2
1
9 8
6 5
4
10
7
1 Right ear cushion
2 Adjustable headband
3 Left ear cushion
4 Noise-cancelling microphone
5 Mobile talk and Bluetooth on/off button
6 Volume up/volume down bar
7 Inline controller
8 Mute/unmute button
9 PC talk button
10 USB cable/connector
5
Accessories/Spares
(Sold separately)
Carrying case
Leatherette ear cushions
Foam ear cushions
Blackwire C710M/C720M USB cable
noTe For more information on accessories and spares, please visit us at
plantronics.com/accessories.
6
using your headset
Inline controls
Can be used to answer or end a call directly from the headset with
a single press. LED will rapid flash blue when a call is coming in and
slow flash blue when on a call. Can be used to manually turn on or off
the Bluetooth radio with very long press; Bluetooth status will stay in
last known state.
Mobile talk button
PC talk button
Can be used to answer or end a call directly from the headset with a
single press. LED will rapid flash green when a call is coming in and
slow flash green when on a call. Can also be used to put a caller on
hold with medium press.
Volume up and down are available by pushing the bar up and down.
Volume
Mute
A single press of the mute button will mute the microphone. A red LED
will be on when you are muted. Pressing this button again will take
the microphone off mute.
CAuTIon For your safety, do not use headset at high volumes for extended periods
of time. Doing so can cause hearing loss. Always listen at moderate levels. For more
information on headsets and hearing visit: plantronics.com/healthandsafety.
7
Wearing the headset
1 To adjust the headband, lengthen or shorten the band until it fits comfortably. Position the
headset receivers so that the cushions sit comfortably over the center of your ears.
2 For the C710M headset position the stabilizer T-bar above your ear.
3 Once the headset is positioned on your head, adjust the flexible boom so the tip of the boom
points to the corner of your mouth. The boom can be shaped to follow the curvature of your
face.
noTe Headset is designed for boom to be worn on the left side of your face. To wear the headset
so boom is on the right side, rotate the microphone boom upwards until it aligns with the right
corner of your mouth. Left and right audio channels will be switched.
8
Connect, charge, and make a mobile phone call
Connect headset to PC
1 Connect the USB cable to the PC and the inline controller.
The first time you connect your headset to the PC, the mobile talk button on the headset will
flash red and blue indicating the initial pairing process of your mobile phone.
noTe If you do not want to pair your mobile phone now, press and hold the mobile talk button
more than five seconds to power off the bluetooth radio. The LED will turn solid red for two seconds.
See other features for more information.
Charge your headset
NOTE Your new headset has enough power to make a few mobile calls before charging is needed.
When your headset is connected to the PC the mobile talk button will be solid red when charging and
off when fully charged.
1 Plug in your headset and place on a flat non-metallic surface. The sensors in your headset fully
calibrate while charging.
A full charge will take approximately two hours. When fully charged the LED goes off.
NOTE Always charge at near room temperatures; never charge battery at temperatures below 0º C
(32ºF) or above 40º C (104ºF).
Headset battery levels
With Plantronics Spokes® software installed, a headset icon will appear in your system tray,
displaying battery status. The plantronics battery status will notify you of four different battery
levels (25%, 50%, 75% and 100%). Fully charge the headset at least once to properly calibrate
the battery status.
Make a mobile phone call
1 Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/
discover new Bluetooth devices.
BlackBerry® Settings/options > Bluetooth: On > Search for devices.
iPhone Settings > General > Bluetooth > On (starts the search for devices)
Android™ Phone Settings > Wireless > Bluetooth: On > Scan for devices.
Other Consult phone manual
9
NOTE For detailed pairing instructions for popular mobile phones visit plantronics.com/easytopair
Blackwire C700
2 If prompted by mobile phone, type 0000 as passcode.
The mobile talk button will stop flashing when the headset has an active connection with the
mobile phone.
3 While wearing your headset, make a test call from your mobile phone.
During an active call, the mobile talk button will flash blue.
4 To use mobile phone away from PC, disconnect the USB cable from the inline controller.
noTe When a fully charged headset is disconnected from the PC there is enough power to make
four to five hours of mobile calls before charging is needed. Reconnect the headset to the PC and the
mobile talk button will be solid red when headset is charging and off when fully charged.
5 End the call by pressing the mobile talk button.
TIP For iPhone users, the headset battery level is displayed on the iPhone home screen. The headset
must be connected to the iPhone.
The call does not end if you remove your headset without pressing the mobile talk button. See
Advanced features.
noTe For call control and other features, download Plantronics Spokes software at
plantronics.com/software.
10
Placing a call with your headset and Bluetooth mobile phone
Place a call
Dial number on your mobile phone keypad.
Redial last number*
Double press mobile talk button. There will be a double low tone on each
press. A low-low-high tone indicates the last number has been redialed.
Activate voice dialing*
Press and hold mobile talk button for two seconds. You will hear a tone
followed by a second tone which indicates voice dial is activated.
* Only available on mobile phones that support these features.
Answering and ending calls with your headset and Bluetooth mobile phone
Answer a call
Short press mobile talk button.
Answer a call when already on Short press the PC talk button to end the PC softphone call. Then press
an active PC softphone call
End a call
the mobile talk button to answer the mobile phone call.
Short press mobile talk button.
Reject a call
Press mobile talk button for two seconds until you hear a second long
single low tone.
Transfer a call from your
While on a call, press the mobile talk button for two seconds until you
mobile phone to your headset hear a single tone followed by a long low tone.
Transfer a call from your
While on a call, press the mobile talk button two seconds until you hear a
headset to your mobile phone long low tone followed by low-low-high tones. Or if using smart sensors,
remove the C710M/C720M headset to transfer audio to your mobile phone.
* Only available on mobile phones that support this feature.
Mobile talk button behavior with PC and mobile connected (not on a call)
Redials last number on
mobile phone*
Double press the mobile talk button.
Starts voice dialing on
mobile phone*
Press the mobile talk button for 2 seconds.
* Only available on mobile phones that support this feature.
noTe For call control and other features, download Plantronics Spokes software at
plantronics.com/software.
Mobile talk button LED indicators
Rapid flash blue
Incoming call
Active call
Slow flash blue
Slow flash blue
Media audio
Pairing mode
Powering on
Power off
Flash red and blue
Solid blue (two seconds)
Solid red (two seconds)
11
®
use your headset with Microsoft Lync /office Communicator
1 Ensure Microsoft Lync/Office Communicator is running on your PC.
2 Reconnect USB cable to inline controller and the PC if disconnected.
3 Confirm the speaker and microphone settings for your PC softphone are set to Plantronics
Blackwire C710M/C720M as shown below:
PC audio setup for Windows 7 (To reach this screen: Control Panel > Sound)
Default Setting: All PC sounds and audio is played in the headset.
PC audio setup for Windows XP (To reach this screen: Start > Control Panel> Sound and Audio Devices)
Default Setting: All PC sounds and audio is played in the headset.
Blackwire C7xx
Blackwire C7xx
Blackwire C7xx
Blackwire C7xx
12
Placing, answering, and ending calls with Microsoft Lync/Office Communicator
To place a call
Dial number using Microsoft Lync/Office Communicator.*
Short press PC talk button on the inline controller.
To answer a call
To answer a call when
Press the mobile talk button to end the mobile phone call then press PC
already on an active call on talk button.
your mobile phone
To end a call
Short press the PC talk button.
*Consult Microsoft Lync/Office Communicator Help for more information on how to place a call.
PC talk button LED indicators
Rapid flash green
Slow flash green
Slow flash green
Incoming call
Active call
Media audio
13
Advanced features
Smart Sensor technology
Sensors detect whether or not you are wearing the headset. Sensors are located in the speaker
capsule on the microphone boom side.
Auto answer call:
When you are not wearing
your headset.
When you have an incoming call on your mobile
or PC softphone, put on the headset and the call
will be answered automatically. You do not have
to press the call button.
Auto pause media:
When you are listening
to media audio.
When you are listening to media audio from
your mobile phone, remove the headset and the
audio pauses. Place your headset back on and
the audio resumes.
Note If the media player has been playing
less than 10 seconds you will have to
manually restart the media player.
Note If the audio remains paused for more
than 5 minutes you will have to manually
restart the media player.
Note Auto pause media feature is only
available with your mobile phone. PC media
audio does not auto pause.
Auto transfer call:
Whether you are wearing your
headset or not.
If you are not wearing your headset and you
answer an incoming call on your mobile phone,
the audio will be routed to the mobile phone.
When you put the headset on, the audio will be
automatically transferred to the headset.
If you are already wearing your headset and
there is an incoming call, the audio will be
routed to the headset and you will need to
press the mobile talk button to answer the call.
NOTE These features are enabled by default and can be disabled in the Plantronics Control Panel.
The Plantronics Spokes software must be downloaded to access the Control Panel. Changes to the
settings requires that you are connected to the PC. Load Plantronics Spokes software by visiting
plantronics.com/software and click “Download.”
Other features
Auto connect
When you are wearing
your headset
Automatically connects headset to mobile
phone when Bluetooth headset is turned on
and within range of devices. Voice prompt will
announce you are connected.
Manual pairing
If powered on, press and hold the mobile talk
button more than five seconds to power off the
bluetooth radio.
If powered off, press and hold the mobile talk
button until the button flashes red and blue.
14
Simultaneous call handling behaviour (PC & mobile)
You can be on a call using a PC softphone application and receive a mobile phone call. The
ringtone for the mobile phone call is heard in the headset. Tapping the PC call button on the
headset will end the PC softphone call. Tapping the mobile call button will answer the mobile
phone call.
NOTE Answering the call on your mobile phone sends the audio to the mobile phone and leaves the
PC softphone call active on the headset.
You can be on a mobile phone and receive a call on your PC softphone. The ringtone for the PC
softphone call is heard in the headset during the call.
Tapping the mobile talk button on the headset ends the mobile phone call. Tapping the PC talk
button answers the PC softphone call.
If you receive a PC softphone call and mobile call at the same time, tapping the mobile or PC
talk button will answer the respective call.
Listening to Audio via A2DP
(Advanced Audio Distribution Profile for Bluetooth)
Your Blackwire C710M/C720M headset can play media files (music, podcasts, etc.) from any
A2DP-enabled mobile device.
Play/Pause
See Auto pause media in the Smart Sensor features table.
Customize
Make it more personal
Visit plantronics.com/myheadset to update and customize your headset with features like:
• Language options for voice prompts
• Disable/enable the sensors
• Disable/enable “Mute off” voice prompt
• Set “Mute on” reminder voice prompt
• Firmware updates as they release
• Plantronics apps to improve your hands-free experience
NOTE You may hear unexpected voice prompts and tones when updating your headset.
Transmission range
If you are on a mobile call, you will hear the audio degrade as you move out of range of
your mobile phone. If you stay out of range, active calls will be suspended. Calls will be re-
established when you walk back into range.
Your Blackwire C710M/C720M allows you to roam as far as 30 feet between devices before the
call is dropped. You will hear a voice prompt “Lost Connection” when the link is dropped.
15
Headset controls, indicators and voice prompts
Action
LeD
Tone
Voice prompt
Incoming PC call
alert
N/A
Rapid green flash Programmable
ringtone
N/A
PC Call answer/end Short press PC
Talk button
Short green flash Answer: Single low
tone followed by low-
N/A
low-high tones End:
Single low tone
PC Call “Flash”
Adjust the listen
Two second Press Short green flash Low Tone
PC Talk Button
N/A
N/A
Press volume up/ Single PC LED
Tone at each change
in volume. Double
volume (during a call) volume down bar flash
tone when min/max
volume level reached
Muting your
microphone
Press and release
Mute Button
On: Mute LED On On: Low-High Tones
Off: Mute LED Off Off: High-Low Tones
On: “Mute On”
Off: “Mute Off”
Mobile (Bluetooth) Press Mobile
On: solid blue for N/A
2 seconds
Off: solid red for 2
seconds
On: “Power on”
followed by “Phone
Connected”,
“No Phone is
connected”, or
“Pairing”.
Power on/off
Talk button for 5
seconds
Off: “Power off”
Check if Mobile
(Bluetooth) is
powered on
Short press Mobile Short blue flash
Talk button
Short Low Tone
N/A
Incoming Mobile
call alert
N/A
Rapid blue flash
Programmable
ringtone
N/A
N/A
Mobile Call
answer/end
Short press Mobile Short blue flash
Talk button
Answer: Single low
tone followed by low-
low-high tones
End: Single low tone
Reconnect Mobile Short press Mobile Single blue flash
Phone after leaving Talk button
range for more
Single low tone
“Phone connected”
than 30 seconds
Mobile redial last
number *
Double Press
Mobile Talk button
Two blue flashes Two low tones
N/A
N/A
followed by low-low-
high tones
Mobile Activate
Voice Dialing *
Press and hold
Mobile Talk button
for 2 seconds
Single blue flash
Short low tone,
followed by long low
tone
16
Action
LeD
Tone
Voice prompt
Mobile Reject Call * Press and hold
Mobile Talk button
Single blue flash
Short low tone,
followed by long low
tone
N/A
for 2 seconds
Transfer Call Audio Press and hold
Single blue flash
Short low tone,
N/A
to/from Mobile
Phone *
Mobile Talk button
for 2 seconds
followed by long
low tone. When
call transferred to
headset you will also
hear the low-low-high
indicating connected.
Mobile (Bluetooth) With Bluetooth
Red/Blue Flashing Short Low Tone
“Power on” followed
by “Pairing”.
Pairing Mode
powered off, press
and hold the
Mobile Talk button
for 5 seconds.
* Only available on mobile phones that support this feature.
17
optional Plantronics Spokes software
Optional Plantronics Spokes software must be downloaded to access the Plantronics Control
Panel. Install Spokes software by visiting plantronics.com/software and click on the download
button.
Plantronics Control Panel
User preferences and device settings that affect the performance of your headset can be
changed using the Plantronics Control Panel.
To start this utility, click Start > Programs > Plantronics > Plantronics Control Panel.
Devices settings
Select your Blackwire C7xx from the pull-down menu then select Device Settings to configure
settings for your headset system.
18
Applications tab
Displays the status of Plantronics support for various applications such as softphones and
media players.
Preferences tab
Allows you to set preferences for the media player as well as other general settings.
19
About tab
Provides online access to the user guide and support and displays your headset system’s
information.
Plantronics Update Manager
Check for updates automatically
By enabling this check box, you will activate a periodic automatic check for available software
updates.
Check for updates now
You can choose to check for available software updates at any time by clicking on the Check
For Updates Now button in Update Manager: From the Start menu, click Programs, then
Plantronics, then open Plantronics Update Manager.
Install checked updates
Following an AUTOMATIC or MANUAL CHECK FOR UPDATES, this field will be populated with
any applicable software updates and the INSTALL CHECKED UPDATES will begin installation.
20
useful tips
Clothing clip
Attach the clip to your clothing about chest level. When at your PC, the clothing clip will reduce
the weight of the inline controller for greater comfort. When using your mobile phone away
from PC, the clip keeps the inline controller in convenient place.
21
Troubleshooting
Troubleshooting — Microsoft Lync/Office Communicator usage
I cannot hear.
Ensure that the Blackwire C710M/C720M is set as the default playback
device in Windows.
Ensure that the Blackwire C710M/C720M is set as the audio device
in the softphone (refer to softphone manufacturer for instructions on
changing the audio output).
Make sure that the individual volume settings on the headset, Windows
and softphone are not turned down too low.
I cannot be heard.
Ensure that the Blackwire C710M/C720M is set as the default recording
device in Windows.
Ensure that the Blackwire C710M/C720M is set as the audio device
in the softphone (refer to softphone manufacturer for instructions on
changing the audio output).
Make sure that the individual volume settings on the headset, Windows
and softphone are not muted.
My headset doesn’t work
with Microsoft Lync/Office
Communicator.
Make sure your headset is connected.
Press the PC talk button on the inline controller.
Adjust the listening volume with the volume bar on the inline controller.
If the volume is still too low, adjust the listening volume on the PC using
Microsoft Lync/Office Communicator.
The sound is distorted or I
hear an echo in the headset.
Reduce speaking volume on the PC using Microsoft Lync/Office
Communicator.
Point microphone towards your chin.
If the distortion is still present, lower the volume using PC talk button.
While on a Microsoft Lync/
Office Communicator call, I
want to accept a call from my
mobile phone.
Press the PC talk button to end PC call and then press the mobile talk
button to accept the mobile call.
Troubleshooting — Mobile phone usage
My headset does not work Ensure that the headset is fully charged.
with my mobile phone.
Make sure the headset is paired with the mobile phone you are trying to
use. See plantronics.com/easytopair
My phone did not locate
the headset.
Turn both your mobile phone and headset off, then restart the mobile
phone and repeat the pairing process. (See “Connect headset to PC”).
I could not enter my PIN
code.
Turn both your mobile phone and headset off and on and then repeat the
pairing process. (See “Connect headset to PC”). Your PIN code, or password,
is 0000 (4 zeros).
NOTE Many mobile phones input the password automatically during
the pairing process. Your phone may not ask you to manually input a
password.
Audio quality is poor.
Your headset is out of range. Move the headset closer to the mobile phone.
22
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
© 2012 Plantronics, Inc. All rights reserved. Plantronics, Blackwire, C710M, C720M, Spokes, and Smart Sensor are trademarks or registered trademarks of Plantronics, Inc. Microsoft,
Internet Explorer, Lync, Windows, Windows Vista, and Windows XP are registered trademark of Microsoft Corporation in the United States and / or other countries. BlackBerry is the
property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. The Bluetooth trademark is owned by Bluetooth SIG, Inc. and any use of
the mark by Plantronics, Inc. is under license. All other trademarks are property of their respective owners.
Patents pending
89283-06 (10.12)
|