Samsung Security Camera SVD 4600 User Guide

High Resolution Vandal-proof Dome Camera SVD-4600 User Guide  
Before installing and operating this product,  
please read this manual thoroughly.  
ENGLISH  
 
Before operating the camera, confirm the camera model and proper input power  
voltage. In order to that you can understand this manual thoroughly, we'll introduce our  
model description.  
n SVD-4600 SERIES  
• NTSC MODEL  
SVD-4600(W)N  
• PAL MODEL  
SVD-4600(W)P  
n MODEL DESCRIPTION  
The lightning flash with an arrowhead symbol, within an equilateral triangle is  
intended to alert the user to the presence of uninsulated “dangerous voltage”  
within the product's enclosure that may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
• SVD-4600(W)X  
_ _  
SIGNAL SYSTEM  
CAMERA COLOR  
• SIGNAL SYSTEM  
N NTSC MODEL  
P PAL MODEL  
The exclamation point within an equilateral triangle is intended to alert the user  
to the presence of important operating and maintenance (servicing) instructions  
in the literature accompanying the appliance.  
• CAMERA COLOR  
SILVER COLOR  
W IVORY COLOR  
INFORMATION -This equipment has been tested and found to comply with limits  
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference when the  
equipment is operated in a commercial environment. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference to radio  
communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at  
his own expense.  
WARNING -Changes or modifications not expressly approved by the manufacturer  
could void the users authority to operate the equipment.  
WARNING -To prevent electric shock and risk of fire hazards:  
Do NOT use power sources other than that specified.  
Do NOT expose this appliance to rain or moisture.  
This installation should be made by a qualified service person and  
should conform to all local codes.  
 
Contents  
Features  
Precautions …………………………………………………………………… 7  
Components and Accessories …………………………………………… 9  
Overview………………………………………………………………………… 9  
Connection ……………………………………………………………………… 10  
Ultra High Resolution  
Day & Night  
By adopting a double-speed 410,000 pixel Sony CCD, the  
camera produces clear picture quality with a horizontal  
resolution of 560 TV lines for color, and 700 TV lines for B/W.  
The camera identifies whether it is day or night and  
automatically switches to the appropriate mode, depending on  
its environment. By day, the camera switches to color mode in  
order to maintain optimal color. At night, it switches to B/W  
mode so as to obtain better picture definition.  
n
n
n
Connecting To Monitor……………………………………………………………… …10  
Connecting To Power………………………………………………………………… …11  
RS-485 communication control…………………………………………………… …12  
Vari-focal Lens Built-in  
DIS (Digital Image Stabilizer)  
With built-in vari-focal lens, the camera can control the focal  
distance easily from 2.8 to 10.0mm.  
The DIS function compensates for any camera  
movement, to produce more stable pictures.  
Operating Your Camera …………………………………………………… 13  
n
n
Menu Configuration…………………………………………………………………… …13…  
Menu Setup…………………………………………………………………………… …13…  
Sub Monitor Function  
Wide Dynamic Range (WDR):  
The sub monitor function enables easy adjustment of the  
camera angle within the monitoring range during its installation.  
• LENS…………………………………………………………………………………………14…  
• EXPOSURE…………………………………………………………………………………15…  
• WHITE BALANCE……………………………………………………………………………16…  
• BACKLIGHT…………………………………………………………………………………18…  
• SSNR……………………………………………………………………………………… 20…  
• DAY/NIGHT…………………………………………………………………………………21…  
• IMAGE ADJ……………………………………………………………………………… 22…  
• SPECIAL…………………………………………………………………………………… 24…  
• EXIT………………………………………………………………………………………… 28  
By adopting a proprietary SV-IV DSP chip, the camera delivers  
clear, high quality pictures even in backlight, by increasing  
exposure in dark areas while decreasing it in bright areas; a  
corrected image with clear details results.  
IP66 Approved /  
Dust & Rain Resistant  
With dust and rain resistant design, the camera can be  
installed ouside under building eaves or place that is  
esposed to the dust and rain.  
Excellent Sensitivity  
Adopting a Diagonal 6mm (1/3"), highly sensitive CCD and  
digital signal processing technology, it can clearly  
distinguish the outline and color of a subject in an  
extremely low luminance environment – even, for example,  
under starlight. Since surveillance is possible in places  
where the light is poor, the camera is appropriate for day  
and night surveillance outdoors or on the outside of  
buildings.  
Miscellaneous Functions  
SYNC(INT/LL), SENS-UP, FREEZE, FLIP(H/V-REV),  
D-ZOOM, SHARPNESS, MOTION DETECTION and  
PRIVACY functions are provided.  
Troubleshooting …………………………………………………………… 29  
Specification………………………………………………………………… 30  
Dimension …………………………………………………………………… 30  
RS-485 Communication  
Control Support  
- 0.00004 Lux  
Remote OSD menu control via an RS-485 interface is supported.  
SSNR (Samsung Super Noise  
Reduction) Function  
OSD  
The camera control is convenient by using 9 different  
foreign language O.S.D.  
- NTSC : Korean, English, Spanish, Japanese, French, Portuguese  
- PAL : English, French, German, Spanish, Italian, Chinese, Portuguese  
The high performance SV-IV DSP chip  
dramatically reduces the gain noise in digital  
image processing, producing clear, sharp images  
in low lighting environments.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
4
5
Samsung Techwin cares for the environment at all product manufacturing  
stages to preserve the environment, and is taking a number of steps to provide  
customers with more environment-friendly products.The Eco mark represents  
Samsung Techwins will to create environment-friendly products, and indicates  
that the product satisfies the EU RoHS Directive.  
Precautions  
Do not install the camera in  
extreme temperature conditions.  
Do not install or use the camera in an  
environment where the humidity is high.  
Warnings & Cautions  
This information is provided to ensure your safety and to prevent any losses, financial or  
otherwise. Please read it carefully and use the product accordingly.  
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as  
an aerial ladder while providing after-sales service shall be at your expense.  
* Separate the power plug when thunder crashes or lighting flashes.  
* This product is support equipment for surveillance system. Therefore, we can't compensate for material loss and/or  
personal injuries by robbery, fire, natural disaster or something like this type.  
Only use the camera under conditions  
where temperatures are between  
-10ºC and +50ºC. Be especially careful  
to provide ventilation when operating  
under high temperatures.  
It can cause the image quality to be  
poor.  
Warning/Attention/Special Mark Messages  
Ignoring this information may  
Ignoring this information may  
result in material loss and/or  
result in material loss and/or a  
serious personal injuries including  
slight injuries.  
death.  
Do not install the camera under  
unstable lighting conditions.  
Do not touch the front lens of the  
camera.  
Indicates “Never Allowed.”  
Indicates “No Disassembling.”  
Severe lighting change or flicker can  
cause the camera to work improperly.  
It is one of the most important parts of  
the camera. Be careful not to be  
stained by fingerprint.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
6
7
Precautions  
Components and Accessories  
 
2
3
4
5
Do not drop the camera or subject  
them to physical shocks.  
Never keep the camera face to  
strong light directly.  
6
7
5
2
6
3
4
SVD-4600……  
Wrench  
Instruction Manual……  
M5 Tapping Screw 4EA……  
Quick Install Guide…………  
7
Installation Video Output Cable  
Template  
It can cause malfunctions to occur.  
It can damage the CCD.  
Overview  
Do not expose the camera to  
radioactivity.  
3  
…  
…  
12…  
If it is exposed to radioactivity, For  
heated CCD, it will be out of order.  
54…  
Notes  
• If the camera is exposed to spotlight or object reflecting strong light, smear or  
blooming may occur.  
8…  
7…  
6…  
• Please check that the power satisfies the normal specification before connecting  
the camera.  
…  
9…  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
8
9
Overview  
Intermediate End monitor  
Pan Base  
:
control panning angle of camera  
Rotate Base control rotating angle of camera  
X3.6 Vari-focal Lens Module  
Rotate Base Holding Screw  
Pan Base Holding Screws (Color : Silver)  
2
3
4
5
6
7
9
:
:
fix rotated position  
fix panned position  
:
RS-485 Control Cable  
Power Input Jack  
Function Setup switch  
:
The detailed description refers to p12  
8
Video Output Jack  
CCTV Camera  
:
display the menu on the screen and move the cursor to four  
directions to confirm status or after changing a selected item.  
Connecting to Power  
Dome Cover  
Video Output Terminal to Monitor  
Shield Case  
Connect the adaptor to the power input  
connector as shown in the figure below.  
The recommended adaptor specification  
for SVD-4600 is AC 24V / 500mA or DC 12V  
/ 500mA.  
power input terminal  
Connection  
Connecting to Monitor  
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.  
When the resistance value of copper wire is at [20ºC(68°F)]  
Copper wire size (AWG)  
Resistance (Ω / m)  
#24(0.22)  
0.078  
#22(0.33)  
0.050  
#20(0.52)  
0.030  
#18(0.83)  
0.018  
Voltage Drop (V/m)  
0.078  
0.018  
0.011  
0.006  
• As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an  
excessively long adaptor output line for connection to the camera may affect the  
performance of the camera.  
CCTV Camera  
Monitor  
*Standard voltage for camera operation : DC 12V 10%,AC 24V 10%  
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.  
• As the connecting method varies with the instruments, refer to the manual supplied with the  
instrument.  
• If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.  
• Only connect the cable when the power is turned off.  
Notes  
• Be sure to connect power only after all the installation is complete.  
• Use the UL listed, class 2 power transformer of AC 24V adaptor.  
• Ground should be connected to the GND terminal.  
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
11  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
10  
Connection  
Operating Your Camera  
Menu Configuration  
RS-485 communication control  
Setup Menu  
Connecting to RS-485 Control Cable  
DC  
SHUTTER  
RETURN  
ATW  
OUTDOOR  
LENS  
AGC…………………  
SENS-UP………  
CONTROL CABLE  
RED (TRX+)  
WHITE(TRX-)  
SPEC  
EXPOSURE  
RS-485+  
RS-485-  
MANUAL  
AWCSET  
WHITE BALANCE  
BACKLIGHT  
INDOOR  
OFF  
WDR  
BLC  
Using a RS-485 communication, it will be able to control the OSD menu at the  
SAMSUNG TECHWIN System Controller or DVR.  
(1) The case which it controls from the PC  
Using a RS-485 converter, It connects to RS-485 control cable outside camera  
and serial cable  
HLC  
ON  
SSNR  
OFF  
B/W  
DAY/NIGHT  
COLOR  
AUTO  
● ………  
V-REV  
H-REV  
IMAGE ADJUSTMENT  
(IMAGE ADJ.)  
FREEZE  
EX) SERIAL PORT OF THE PC(COM1)  
CONTROL CABLE  
SERIAL CABLE  
RS-485 CONVERTER  
RS-485  
………… ●  
D-ZOOM  
SHARPNESS  
RETURN  
………  
CAMTITLE  
SYNC  
……  
MOTION DET  
(2)The case which it controls from the DVR or System Controller  
It connects the RS-485 control cable in the connection terminal of 485 control  
boards which are connected with the DVR or System Controller.  
DIS  
SPECIAL  
EXIT  
PRIVACY  
COMM ADJ  
RESET  
LANGUAGE  
RETURN  
485 Control Board Connection Port  
(+) CONNECTION TERMINAL  
RS-485 Control Port  
RED (TRX+)  
Menu Setup  
(-) CONNECTION TERMINAL  
WHITE (TRX-)  
* RS-485 Communication establishment initial value  
Use the Function Setup switch on back of the camera.  
Item  
Camera ID  
1
BAUD RATE  
UART MODE  
8-NONE-1  
RET PKT  
ENABLE  
Function Setup switch  
Initial value  
9600  
Notes  
• When you construct external control systems for a camera control, please use to the SAMSUNG  
TECHWIN PROTOCOL or PELCO-D PROTOCOL.  
• When you connecting to RS-485 control cable, please peel off the outer skin inside the RS-485  
control cable.  
• In case of SCC-101 connection, change communication mode to  
8-E-1』  
atCommunication  
configuration menu. (For more information, refer to SCC-101 manual.)  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
13  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
12  
Operating Your Camera  
DC : Select Auto Iris Lens  
1. Press the Function Setup switch.  
• Main setup menu is displayed on the monitor screen.  
• When DC is selected, you can control screen  
brightness. The range of brightness control is  
between 1 and 70. Adjust the brightness  
appropriately for optimal screen brightness.  
MAIN SETUP  
Select the function by moving  
Change the status by  
moving right or left  
direction of function setup  
switch.  
1.LENS  
DC  
up or down direction of  
function setup switch.  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
5.SSNR  
ATW  
OFF  
ON  
EXPOSURE  
6.DAY/NIGHT  
7.IMAGE ADJ  
8.SPECIAL  
9.EXIT  
AUTO  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
ATW  
2. Select a desired function using the Function Setup switch.  
• Place the cursor over a desired item.  
3. Set up a selected item by using the Function Setup switch.  
1.When the SETUP menu screen is displayed, select  
'EXPOSURE' by using the Function Setup switch so that  
the arrow indicates 'EXPOSURE'.  
4.To finish the setting, select ‘EXIT’ and press the Function Setup switch.  
Notes  
2. Select a desired mode using the Function Setup switch.  
• An item with the icon also has sub menus. To select a sub menu, select an item  
with the icon and press the Function Setup switch.  
• An item with the - - - icon is unavailable due to function settings.  
SHUTTER : Because of using a DC lens, the shutter speed is fixed.  
(NTSC mode l: 1/60 sec, PAL model : 1/50 sec)  
When flickering occurs on the screen, select the A.FLK mode using the  
Function Setup switch.  
- A.FLK : Select this when you experience picture flicker, which can happen when there is a  
clash with the frequency of the installed lighting.  
LENS  
Using this function, you can control screen brightness.  
1.When the SETUP menu screen is displayed, select 'LENS' by using the Function  
Setup switch so that the arrow indicates 'LENS'.  
Notes  
To produce better results with A.FLK, do not use it in conjunction with the WDR  
mode of the BACKLIGHT menu.  
MAIN SETUP  
1.LENS  
DC  
• When the SHUTTER is set to A.FLK mode, SENS-UP will be disabled.  
2.EXPOSURE  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
15  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
14  
Operating Your Camera  
AGC (AUTO GAIN CONTROL) :  
The higher the gain level, the brighter the screen - but the higher the noise.  
- OFF : Deactivates the AGC function.  
- LOW :Allows automatic gain control from 5.3dB to 30dB.  
- HIGH :Allows automatic gain control from 5.3dB to 42dB.  
SENS-UP :  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
ATW  
OFF  
When it is night or dark, the camera automatically detects the light level and  
maintains a clear picture if this mode is activated.  
- OFF : Deactivates the SENS-UP function.  
- AUTO :Activates the SENS-UP function.  
Select one of the following 5 modes, as appropriate for your purpose.  
ATW : Select this when the color temperature is between 1,800ºK and 10,500ºK  
INDOOR : Select this when the color temperature is between 4,500ºK and 8,500ºK.  
OUTDOOR : Select this when the color temperature is between 1,800ºK and 10,500ºK.  
(sodium light inclusion)  
AWC SET :To find the optimal setting for the current luminance environment in this  
mode, set the point the camera towards a sheet of white paper and press  
the Function Setup switch. If the environment changes, readjust it.  
RETURN :  
MANUAL : Select this to fine-tune White Balance  
manually. Set White Balance first by using the  
ATW or AWC mode. After that switch to  
MANUAL mode, fine-tune the White Balance  
and then press the Function Setup switch.  
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.  
Notes  
• If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by  
increasing or decreasing the shutter speed. (x2 ~ x256)  
• Note that the higher the zoom level, the brighter the screen, but the more likely it is  
that an after-image will appear.  
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation  
when the zoom level is increased, this is normal.  
Notes  
• White Balance may not work properly under the following conditions. In this case  
select the AWC mode.  
When the color temperature of environment surrounding the subject is out of the  
White Balance (White Bal.)  
control range (e.g. clear sky, or sunset)  
When the ambient illumination of the subject is dim.  
If the camera is directed towards a fluorescent light or is installed in a place  
where illumination changes dramatically, the White Balance operation may  
2
Use the White Balance function to adjust the screen color.  
1.When the SETUP menu screen is displayed, select ‘White Bal.’ by using the  
Function Setup switch so that the arrow indicates ‘White Bal.’ .  
3
become unstable.  
2. Select a desired mode using the Function Setup switch.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
17  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
16  
Operating Your Camera  
• The WDR compensates for backlight more effectively than previous models,  
by applying an optimum fusion ratio when combining the high speed shut  
ter used in bright areas and the low speed shutter used in dark areas.  
BACKLIGHT  
This camera is designed so that it delivers a distinctive subject and background at  
the same time, even when the subject is in backlight, unlike conventional cameras,  
by adopting a proprietary SV-IV DSP chip.  
HLC(High Light Compensation) :  
If the scene contains extremely bright light areas such as; from car headlight,  
the light can mask out much of the on-screen detail.  
- DAY : in normal daylight conditions, the HLC is not activated.  
- NIGHT : lf a high light that is larger than a certain size is present on the screen,  
HLC is activated to remove the high light.  
- HLC : Enable a user to select a mask color of high light area from a picture.  
1.When the SETUP menu screen is  
displayed, select ‘BACKLIGHT’ by using the  
Function Setup switch so that the arrow  
indicates ‘BACKLIGHT‘.  
2. Select a desired mode using the Function  
Setup switch depending on the camera  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
5.SSNR  
ATW  
OFF  
ON  
purpose  
.
BLC : Enables a user to directly select a desired area  
from a picture, and to view the area more clearly.  
• Select BLCto adjust the area to be enhanced and  
enhancement level.  
WDR :When there are both bright and dark areas at  
the same time, this mode makes both areas  
distinctive.  
OFF : Not being used.  
3. Select a desired mode using the Function Setup switch and press the SET button.  
Notes  
• Since the following symptoms may occur according to the ambient illumination when  
WDR is selected, set it to OFF.  
WDR  
OFF  
Color or screen changes unnaturally.  
2
Noise appears in the bright part of the screen.  
Select WDRto adjust the WDR LIMIT and LEVEL.  
• Since the performance of the WDR function may be affected by the area of the bright part  
of the screen, optimize the installation angle for the best WDR performance.  
• If you increase LIMIT, the screen display may be distorted.  
• In a dark environment, the HLC is only activated when a high light that is larger than a  
certain area is present.  
- LIMIT :Adjust the WDR Sensitivity by selecting LOW,  
MIDDLE, or HIGH.  
- LEVEL :Adjust the WDR Brightness by controlling the  
bar from 1 to 100.  
• The HLC is not activated in light or overly dark conditions.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
19  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
18  
Operating Your Camera  
SSNR  
DAY/NIGHT  
You can display pictures in color or black and white.  
1.When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the  
Function Setup switch so that the arrow indicates ‘DAY/NIGHT’.  
This function reduces the background noise in a low luminance environment.  
1.When the SETUP menu screen is displayed, select ‘SSNR’ by using the Function  
Setup switch so that the arrow indicates ‘SSNR’ .  
MAIN SETUP  
MAIN SETUP  
1.LENS  
DC  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
5.SSNR  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
5.SSNR  
ATW  
OFF  
ON  
ATW  
OFF  
ON  
6.DAY/NIGHT  
AUTO  
6.DAY/NIGHT  
7.IMAGE ADJ  
AUTO  
2. Select a desired mode using the Function Setup switch.  
OFF : Deactivates SSNR. Noise is not reduced.  
ON :Activates SSNR so that noise is reduced.  
2. Select a desired mode using the Function Setup switch according to the picture  
display you want.  
3. Set the SSNR mode to ‘ON’ and press the Function Setup switch. Then you can  
adjust the noise reduction level.  
COLOR :The picture is always displayed in color.  
B/W :The picture is always displayed in black and  
white. Please press SETUP button to turn on  
or off the burst signal on B/W mode.  
AUTO :The mode is switched to Colorin a normal  
environment, but switches to B/Wmode  
when ambient illumination is low.To set up  
the switching time or speed for AUTO mode,  
press the Function Setup switch.  
Notes  
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE  
menu is ‘OFF’.  
- DWELL TIME :You can select the duration time about  
changing the day/night mode.  
• When adjusting the noise reduction level of the SSNR mode, remember that the  
higher the level set, the more the noise level will be reduced but that after image  
may also occur.  
5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s  
- DURATION :You can select brightness of illumination about changing the  
day/night mode.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
21  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
20  
Operating Your Camera  
Color →…B/W B/W →…Color  
IMAGE SETUP  
1. V-REV  
2. H-REV  
Fast  
Slow  
2.5 lux  
4 lux  
6 lux  
* The brightness of illumination is changeable  
by installed environment.  
OFF  
OFF  
OFF  
ON  
0.8 lux  
3. D-ZOOM  
EXTERN :This mode allows you to apply a desired filter to external signals.  
4. SHARPNESS  
5. PED LEVEL  
6. RETURN  
0
Notes  
You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’.  
At this time, the exchange between DAY mode and NIGHT mode operates as like  
selecting ‘COLOR’ mode.  
FREEZE :You can view still or moving pictures.  
V-REV :You can flip the picture vertically on the  
• The OSD key does not work for 3 seconds when switching to Color or B/W, to  
ensure stable camera operation.  
screen.  
H-REV :You can flip the picture horizontally on  
The camera may focus less well under infrared illumination than under normal illumination.  
the screen.  
D-ZOOM :You can use a digital zoom of x2~x10.  
IMAGE ADJ.  
SHARPNESS :  
1.When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the  
Function Setup switch so that the arrow indicates ‘IMAGE ADJ.’  
As you increase this value, the picture outline  
becomes stronger and clearer.Adjust this value  
appropriately depending on the sharpness of  
the picture.  
MAIN SETUP  
PED LEVEL : Please use this menu item when  
using a LCD monitor other than  
standard ones.You can change  
PED LEVEL.  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
5.SSNR  
ATW  
OFF  
ON  
RETURN : Select this to save the settings for the IMAGE ADJ. menu and to  
return to the SETUP menu.  
6.DAY/NIGHT  
7.IMAGE ADJ  
8.SPECIAL  
AUTO  
Notes  
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.  
• If you increase the SHARPNESS level too high, the picture may become distorted or  
noise may appear.  
2. Select a desired mode using the Function Setup switch.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
23  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
22  
Operating Your Camera  
Notes  
SPECIAL  
SPECIAL  
1. CAM TITLE  
• When theCAMTITLEmenuisOFF,notitle  
will bedisplayedonthemonitorscreen  
even if you enter one.  
1.When the SETUP menu screen is displayed, select ‘SPECIALby using the Function  
Setup switch so that the arrow indicates ‘SPECIAL.  
OFF  
INT  
OFF  
OFF  
OFF  
2. SYNC  
3. MOTION DET  
4. PRIVACY  
5. DIS  
• Only English is available in this mode.  
MAIN SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.BACKLIGHT  
5.SSNR  
ATW  
OFF  
ON  
3
Press the Function Setup switch.  
CAMERA TITLE SETUP  
ABCDEFGHIJKLM  
NOPQRSTUVWXYZ  
abcdefghijklm  
nopqrstuvwxyz  
-.0123456789  
6.DAY/NIGHT  
7.IMAGE ADJ  
8.SPECIAL  
9.EXIT  
AUTO  
←→…CLR POS END  
2. Select a desired mode using the Function Setup switch.  
4
Use the Function Setup switch to move to a desired letter and select the letter  
by pressing the Function Setup switch. Repeat this to enter multiple letters.  
You can enter up to 15 letters.  
SPECIAL  
1. CAM TITLE  
2. SYNC  
OFF  
INT  
OFF  
OFF  
OFF  
Notes  
3. MOTION DET  
4. PRIVACY  
5. DIS  
• If you move the cursor to CLR and press the Function Setup switch, all the letters  
are deleted. To edit a letter, change the cursor to the bottom left arrow and press  
the Function Setup switch. Move the cursor over the letter to be edited, move the  
cursor to the letter to be inserted and then press the Function Setup switch.  
6. COMM ADJ  
7. LANGUAGE  
8. RESET  
ENGLISH  
5…  
Enter a title, move the cursor to ‘POS’ and press  
the Function Setup switch. The entered title  
appears on the screen. Select the position to  
display the title on the screen by using the  
Function Setup switch and press. When the  
position is determined, select ‘END’ and press the  
Function Setup switch to return to the SPECIAL  
menu.  
9. RETURN  
FRONT DOOR  
CAM TITLE : If you enter a title, the title will appear on the monitor.  
If the SPECIAL menu screen is displayed, use the Function Setup switch so  
that the arrow indicates ‘CAM TITLE’.  
2
Set it to ‘ONby using the Function Setup switch.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
25  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
24  
Operating Your Camera  
SYNC : In areas where the supply is at 60Hz, you can  
Notes  
synchronize the output phase of multiple cameras  
using the power synchronization function (Line-  
Lock) without using a synchronization signal  
generator.  
MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the  
monitor screen.  
When motion is detected,MOTION DETECTION” expression is displayed on the screen.  
- INT : Internal Synchronization Type  
- L/L : Power Synchronization Type, Line-lock  
• Press the Function Setup switch.  
You can select a desired phase from 0 to 359 when select 'phase'.  
You can decide the synchronization between luminance and color signal when  
select the 'Mode' to TRACE.  
PRIVACY : Hide an area you want to hide on the  
screen.  
When the SPECIAL menu screen is displayed,  
press the Function Setup switch so that the  
arrow indicates ‘PRIVACY’.  
Notes  
2
Set up the mode using the Function Setup  
When using AC power at 60Hz frequency, you can use the L/L type synchronization.  
• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.  
switch.  
- AREA SEL :You can select up to 8 PRIVACY areas.  
- AREA MODE : Determines whether to use the area  
selected in the AREA SEL, and the  
MOTION DET:  
size and position of the area.  
You can monitor activity more efficiently, because a  
signal is generated by the camera whenever  
motion is detected.  
-
MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black,  
White.  
- TRANSP : Determine the transparency of selected area as controlling number  
When the SPECIAL menu screen is displayed, press the Function Setup  
from 0 to 3.  
switch so that the arrow indicates ‘MOTION DET’.  
- RETURN : Select this to save the PRIVACY menu settings and return to the  
SPECIAL menu.  
2
Set up the mode using the Function Setup switch.  
- SENSITIVITY :You can select up to 8 MD areas.When SENSITIVITY number is high,  
motion detection sensitivity is increased to recognize even small  
movement.  
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.  
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.  
- YPOS : Determines the coordinate of the vertical axis for SEL POS.  
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.  
- FILL SET : Fills in a selected MD area. Fills in a selected MD area.The color of filling  
is sequentially selected as brown, orange, blue, cyan, yellowish green,  
yellow and red.  
DIS (Digital Image Stabilizer) :  
This function mitigates any picture movement due to external factors such as  
wind.  
Notes  
The chance of resolution decrease is existed because DIS function uses the digital zoom.  
DIS doesn’t operate when background illumination is too low.  
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.  
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL  
menu.  
• If DIS is enabled, the digital zoom is configured to less than 46 level.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
27  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
26  
Operating Your Camera  
Troubleshooting  
Refer to the following table if you are experiencing trouble with your camera.  
Contact an authorized technician if the table does not provide you with a  
solution to the trouble.  
COMM ADJ (Communication Adjustment) :  
This function sets up the camera communication status when controlling the  
camera through an external control device.  
Nothing appears on the screen.  
When the SPECIAL menu screen is displayed, press the Function Setup  
Check that the power cord and line connection between the camera and monitor are fixed properly.  
Check that you have properly connected VIDEO cable to the camera VIDEO output jack.  
switch so that the arrow indicates ‘COMM ADJ’.  
Set up the mode using the Function Setup switch.  
2
The image on the screen is dim.  
Is lens stained with dirt? Clean your lens with soft, clean cloth.  
Set the monitor to proper condition.  
If the camera is exposed to too strong light, change the camera position.  
The image on the screen is dark.  
Adjust the contrast feature of the monitor.  
If you have an intermediate device, set the 75Ω/ Hi-z properly.  
The camera is not working properly, and the surface of the camera is hot.  
Check that you have properly connected the camera to an appropriate power source.  
The DAY/NIGHT menu does not work.  
- CAM ID : Determines the camera's identification number (between 0 and 255).  
- BAUD RATE :You can select 2400/4800/9600/19200/38400/57600 bps.  
- UART MODE :You can select NONE, EVEN or ODD for the parity bits.  
- RET PKT : Determines whether to send a command back to the controller device  
when a communication control command is sent to the camera.  
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.  
The SENS-UP function does not work.  
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.  
Check that SHUTTER of EXPOSURE SETUP menu is A.FLK’ .  
The Motion Detection function does not work.  
- DISP CAM ID : Display camera title on top left corner of the screen.  
Check that MOTION DEF of SPECIAL SETUP menu is ‘OFF’.  
Color is not correct.  
* Initial value of communication adjustment  
Check the setting of WHITE BAL SETUP menu .  
Item  
Initial value  
Camera ID  
1
BAUD RATE UART MODE  
9600 8-NONE-1  
PET PKT  
ENABLE  
The screen flickers continually.  
Check that direction of camera turns toward the Sun.  
RS-485 communication fails.  
LANGUAGE :You can select the menu language according to your  
Check the polarity between RS-485 Control Port and RS-485 cable.  
requirements.  
485 Control Board Connection Port RS-485 Control Port  
RESET : Resets the camera settings to the factory defaults.  
RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP  
(+) CONNECTION TERMINAL (TRX+)  
( -) CONNECTION TERMINAL (TRX-)  
485+  
485-  
menu.  
Check the RS-485 Communication establishment initial value  
* RS-485 Communication establishment initial value  
Item  
Initial value  
Camera ID  
1
BAUD RATE UART MODE  
9600 8-NONE-1  
RET PKT  
ENABLE  
EXIT  
Press the Function Setup switch in the EXIT menu to save the current settings and exit the  
MAIN SETUP menu.  
We recommend that you make ground connect between camera and controller in order to maintain  
safety communication control.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
29  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
28  
DECLARATION OF CONFORMITY  
Specifications  
Application of Council Directive(s)  
89 / 336 / EEC  
SVD-4600(W)N  
SVD-4600(W)P  
Input voltage  
Power consumption  
AC24V / DC12V  
3.5W  
Manufacturer's Name  
Manufacturer's Address  
SAMSUNG TECHWIN CO., LTD  
SAMSUNG TECHWIN CO., LTD  
42, SUNGJU-DONG CHANGWON-CITY,  
KYUNGNAM, KOREA, 641-716  
POWER  
CCD  
Size  
Diagonal 6mm (1/3") Sony DS CCD  
Total Pixels  
Effective Pixels  
Scanning System  
811(H) x 508(V)  
768(H) x 494(V)  
795(H) x 595(V)  
752(H) x 582(V)  
2:1 Interlace  
Sync Synchronization  
Internal / Line Lock  
Frequency  
H : 15.734KHz / V : 59.94Hz  
Korean, English, Japanese,  
French, Spanish, Portuguese  
H : 15.625KHz / V : 50.00Hz  
English, French, Germany, Spanish,  
Italy, Chinese, Portuguese  
O.S.D  
European Representative Name  
European Representative Address  
Equipment Type/Environment  
Model Name  
Back-light Compensation  
Resolution  
WDR / HLC / BLC / OFF  
Color : 560 TV LinesB/W : 700 TV Lines↑  
52 dB (AGC Off,Weight ON)  
0.001 Lux (Color Sens-up), 0.00004 Lux (B/W Sens-up) at F1.2  
ATW / AWC / Manual / Outdoor / Indoor (1800°K ~10,500°K)  
S/N (Y signal)  
Min. Illumination  
White Balance  
Electronic Shutter Speed  
Sens-up  
Gain Control  
SSNR  
Motion Detection  
PRIVACY  
V-REV (Mirror)  
H-REV (Flip)  
FREEZE  
SHARPNESS  
IRIS Control  
Day & Night  
DIS  
CCTV Camera  
E
L
Fixed (1/60 or Flickerless Mode)  
Fixed (1/50 or Flickerless Mode)  
AUTO / OFF (Selectable limit x2 ~ x256)  
E
C
T
R
I
C
A
L
SVD-4600P/WP  
LOW/HIGH/OFF  
ON / OFF (1~32 Level)  
ON / OFF (8 Zone)  
ON / OFF (8 Zone)  
Beginning Serial NO.  
S8080001  
ON / OFF  
ON / OFF  
ON / OFF  
Year of Manufacture  
2008. 12. 01  
Conformance to  
EN 50081-1 : 1992  
EMC-Directive 89/336 EEC and 92/31/EEC  
EN 50130-4 : 1996  
ON / OFF (Level Adjustable)  
DC drive Lens  
COLOR / Black & White / AUTO  
ON / OFF  
ON / OFF (x10)  
Digital Zoom  
RS-485 (2400, 4800, 9600, 19200, 38400, 57600 bps selectable)  
Communication  
Built-in Lens  
(STW Protocol, Pelco-D Protocol available)  
x3.6 Vari-focal Lens (F1.2 f2.8~10.0mm)  
94.4° ~ 28°  
Horizontal  
Vertical  
PAN  
Angle of view  
69.2° ~ 21°  
Manual 0°~ 340°  
Manual 0°~ 146°  
Monitoring angle  
TILT  
Weather Proof  
Operating  
IP66  
We, the undersigned, hereby declare that the equipment specified above conforms  
to the above Directive(s).  
-10° to +50° / 30% to 80% RH  
Temperature/Humidity  
Storage Temperature/Humidity  
Dimension  
Weight  
20° to +60° / 20% to 90% RH  
Ø148 x 126 mm  
1.3Kg  
Manufacturer SAMSUNG TECHWIN CO., LTD  
Signature  
Legal Representative in Europe  
SVD-4600WN, SVD-4600WP : Ivory color base model  
85mm  
Signature  
Full Name  
Position  
Place  
Ø 148mm  
Dimension  
Full Name  
Position  
Place  
BONJENG GU  
QUALITY CONTROL MANAGER  
CHANGWON, KOREA  
2008. 12. 01  
83.5mm  
85mm  
Date  
Date  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
User Guide  
31  
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.  
30  

Radio Shack Computer Drive 26 137 User Guide
Radio Shack Scanner PRO 2040 User Guide
Radio Shack Video Game Keyboard LK 1161 User Guide
Roland Electronic Keyboard PK 7A User Guide
Samsung DVD Player 1080P7 User Guide
Sanyo Air Conditioner 36XH72R User Guide
Sanyo Digital Camera VPC CG20 User Guide
Schumacher Battery Charger SSC 1500A User Guide
Sears Flat Panel Television 40LE45S User Guide
Seiko Instruments Printer SLP 410 User Guide