Samsung Washer SW57APP User Guide

WASHING MACHINE  
User’s Manual  
SW68ASP / SW57APP  
Please read this manual before using and note how to use in the proper manner.  
Please be careful of keeping the manual.  
Otherwise, it should be bought separately.  
The User’s Manual is for common use.  
Make use of the User’s Manual depending upon your washing machine model.  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
DESCRIPTION OF PARTS . . . . . . . . . . . . . . . . . . . . . . . 2  
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . 3  
INSTALLATION & MAINTENANCE . . . . . . . . . . . . . . . . . 4  
ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
IN CASE OF PUMP-DRAINED WASHER . . . . . . . . . . . . . . . . . . 4  
HOW TO CONNECT WATER SUPPLY HOSE . . . . . . . . . . . . . . . . 4  
HOW TO CLEAN THE FILTER . . . . . . . . . . . . . . . . . . . . . . . . . 5  
CLEANING THE FILTER (pump drained washer) . . . . . . . . . . . . . . . 5  
HOW TO ADD THE DETERGENT . . . . . . . . . . . . . . . . . . . . . . . 5  
LEVELLING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
HOW TO ADD THE FABRIC SOFTENER . . . . . . . . . . . . . . . . . . 5  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
CONTROL PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
WASHING INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . 8  
PROCEDURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
WASH PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
WASHING PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 9  
OPTIONAL CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . 10  
SPECIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Register your product at  
CODE NO. : DC68-02290A  
 
SW68ASP-02290A-EN.indd  
1
2006-08-21 ¿ÀÈÄ 8:33:06  
DESCRIPTIONOFPARTS  
LID  
WATER SUPPLY HOSE  
RED-HOT WATER  
DRAIN HOSE  
WATER SUPPLY HOSE  
BLUE-COLD WATER  
DETERGENT BOX  
CONTROL PANEL  
FABRIC SOFTENER  
DISPENSER  
BLEACH INLET  
POWER PLUG  
MAGIC FILTER  
PULSATOR  
HEIGHT  
ADJUSTING FEET  
2
 
SW68ASP-02290A-EN.indd  
2
2006-08-21 ¿ÀÈÄ 8:33:08  
SAFETYINSTRUCTIONS  
Please note that the following precautions for safety intend to prevent unpredictable danger and damage  
by helping the proper use in safety.  
When using hot water in washing, please make sure that the water should not exceed 50˚C.  
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.  
WARNING  
CAUTIONS  
There might be a slight injury or damage when you  
violate this instruction.  
There might be serious injury or fatal accident when  
you violate this instruction.  
• If the plug (power supply cord) is damaged, it  
must be replaced by the manufacturer or its  
service agent or a similarly qualified person in  
order to avoid a hazard.  
• Don’t install it in the area with moisture or outdoor  
where it has rain or snow  
- An electric shock or a fire may take place.  
• Please unplug the power supply cord when you  
do not use it.  
- An electric shock or a fire may take place.  
• Do not pull the cord off or touch it with moist  
hands.  
- An electric shock or a fire may take place.  
• Do not bend the power supply cord by force or  
press it with heavy things.  
• If there is dust or water on the power supply plug  
and its connected part, please remove it completely.  
- An electric shock or a fire may take place.  
- An electric shock or a fire may take place.  
• Do not install the washer nearby electric  
implement or don’t put a candle light or  
cigarette light on the washer.  
• Do not make your kids look into the inside of the  
washer.  
- If your kid falls into the washer, his life could be  
in danger.  
- A fire may take place.  
• During operation, do not put your hands or metal  
materials under the washer.  
- You may be hurt by spinning board beneath the  
washer.  
• Ventilate immediately without touching the power  
plug if gas is leaking.  
- An electric shock or a fire may take place if it  
catches flame.  
• Stay away from the washer when the bottom of  
the washer sinks into the water.  
- There might be an electric shock. Please wait  
until the water drains out completely.  
• If the washer makes strange noise, smell or  
smoke, unplug it promptly and call service agent.  
- An electric shock or a fire may take place.  
• Do not put laundry stained with gasoline,  
benzene, or alcohol in the washer, and keep the  
materials away from the washer.  
• When cleaning, don’t spray water to the parts of  
the washer directly.  
- An explosion or a fire may take place.  
- It may make it’s life span shorten.  
Also an electric shock or fire may take place  
• During spinning, don’t put your hand in the  
spinning tub.  
- It may hurt your hands. If it does not stop within  
15 seconds after you open the lid, call service  
agent immediately.  
• Don’t use several appliances together with an  
outlet.  
- A fire may take place due to unusual heat.  
• This appliance is not intended for use by young  
children or infirm persons unless they have been  
adequately supervised by a responsible person to  
ensure that they can use the appliance safely.  
Young children should be supervised to ensure  
that they do not play with the appliance.  
• Don’t press the button with an awl or pin.  
- An electric shock or a fire may take place.  
• Use the new hose-sets and old hose-sets should  
not be reused.  
• This appliance has to be connected to the plug  
endurable to proper power consumption.  
• If the damage is found on the current cord in use,  
it should be replaced by manufacturer, service  
cener or authorized person in order to avoid the  
risk.  
• This appliance has to be positioned so that the  
plug is accessible after installation.  
• No user-serviceable parts inside. Refer any servicing  
to qualified service personnel.  
• Connect the grounding wire to the shell plate, and  
bury it under at least 25cm of earth:elternatively,  
connect the ground wire to the appropriate pin on  
a properly grounded power receptacle. Never  
connect the wire to a telephone line, lightning rod,  
or gas pipe.  
- Otherwise this may cause a mechanical error,  
electric shock, fire or physical damage.  
- The product warranty does not cover problems  
resulting from disassembling the product.  
• Do not use this product for business purposes.  
• For washing machines with ventilation openings in  
the base, that a carpet must not obstruct the  
openings.  
3
 
SW68ASP-02290A-EN.indd  
3
2006-08-21 ¿ÀÈÄ 8:33:08  
INSTALLATION &MAINTENANCE  
ENVIRONMENT  
IN CASE OF PUMP-DRAINED WASHER  
Leave some space.  
Takeoutthe Be sure to join tightly Install the drain  
Maintain at least 10cm between the washer and the wall.  
cap-hose and  
connect the  
outlet-hose  
the drain hose into the  
drain-outlet on the left  
side of the machine.  
hose in the position  
of about 70~80cm  
above the ground.  
Place the washer on a sturdy flat surface.  
If the washer is placed on an uneven or weak  
surface, noise and vibration can occur  
(allowable slope is 1 degree)  
Never install the washer in a very steamy  
environment or where it might be open to the rain.  
Excessive moisture may cause an electrical shock hazard.  
Avoid direct sunlight or heaters.  
As plastic and electrical components are affected  
by direct heat,never place the washer near furnaces,  
boilers,etc.Do not place under direct sunlight.  
HOW TO CONNECT WATER SUPPLY HOSE  
Checkthetypeoftapfittingwhichisinyourlaundryandthenseeappropriateinstructionbelow:  
A tap of ordinary type is desirable In case of square tap  
ake out the internal part of the connector  
T
and join it in the following way.  
Internal part  
ORDINARY TAP SQUARE TAP  
ROTATING TAP  
1.Remove the adaptor from the  
water supply hose.  
4.Connect the water supply hose to  
the adaptor. Pull down the part  
(c) of the water supply hose .  
When you release part (c) the  
hose is automatically connects to  
the adaptor making a 'click' sound.  
2. First,using a "+" type screw  
driver, loosen the four screws on  
the adaptor.  
5. Connect the other end of the water  
supply hose to the inlet water valve  
at the top of the washer.  
Next,take the adaptor and  
turn part(b) following the  
arrow for gap about 5mm  
between them.  
Screw the hose clockwise all the  
way in.  
3. Connect adaptor to the water  
tap by tightening the screws  
firmly.  
6. If the water tap is a screw type,  
assemble a water supply hose that  
fits to the tap as shown.  
Then,turn part (b) following  
the arrow and put (a) and  
(b)together.  
Note : The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not  
be used.  
4
 
SW68ASP-02290A-EN.indd  
4
2006-08-21 ¿ÀÈÄ 8:33:11  
HOW TO CLEAN THE FILTER  
CLEANING THE FILTER (pump drained washer)  
Clean the filter net often to keep the washer clean.  
1. Place a rag under washer filter not to wet the floor.  
2. Turn the filter-cap to the left.  
3. Take out the filter and remove any sludge.  
4. Reassemble in reverse order.  
1. Push the upper 2. Open the cover 3. Clean the filter. 4. Close the cover and  
part of the filter  
and pull in.  
as shown in the  
figure.  
insert the lower part  
of the filter in the  
basket first and then  
push the filter with  
"click" sound .  
HOW TO ADD THE DETERGENT  
1. Open the detergent box  
by pulling in the direction of the  
arrow as shown in the figure.  
2. Add the amount of detergent for one  
washing evenly in the box so that the  
detergent does not overflow the box.  
LEVELLING  
1. Pull down the adjusting handles of  
the adjusting feet which are located  
at the right and left of the front side.  
2. Adjust the height of the  
HOW TO ADD THE FABRIC SOFTENER  
machine upwards or downwards.  
3. When the adjustment is finished,  
push back the handles to fix the  
When a proper amount of fabric softener is stored  
in the box, it is automatically added in at the  
final rinse cycle.  
In case the hot water only is connected,  
this function will not be operated.  
adjusting feet.  
Note  
Do not kick or step on the adjusting  
handles.  
When too much softener is stored above the  
base line, it may not be operated properly.  
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING  
THE POSITION OF THE WASHING TUB.  
Open the lid of the machine, pour water into the tub  
up to the level just below the pulsator, and adjust the  
legs so that the pulsator is positioned at the center of  
the water as shown in the figure.  
Place the machine more than 10cm away from the  
wall.  
5
 
SW68ASP-02290A-EN.indd  
5
2006-08-21 ¿ÀÈÄ 8:33:13  
PRECAUTIONS  
WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY  
LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.  
Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine.  
How to earth an outlet with earthing terminals  
when an earthed power load is not fitted.  
Outlet with earthing terminals:  
Even when the internal wires of the earthing terminals are  
joined, connect the earthing conductor (green) of the  
machine to the tap.  
When using an extension cord and a boosting transformer:  
Make sure that the earthing conductor is connected.  
Never make an earthing to  
The telephone line, lightning rod, or gas pipe as it is  
extremely dangerous in case of lightning strikes.  
TO DO A CLEAN WASHING  
Press the POWER botton.  
Pour a little detergent into case-detergent.  
Turn on water supply to the wshing machine.  
Choose the SOAK in CYCLE button and the HIGH in WATER LEVEL button.  
Press the START/PAUSE button.  
6
 
SW68ASP-02290A-EN.indd  
6
2006-08-21 ¿ÀÈÄ 8:33:14  
CONTROLPANEL  
Formoredetails,seecontrolpanelofyourwashingmachine.  
1. POWER BUTTON  
Press this button once to operate.  
Press once again to turn the power off.  
2. START/HOLD BUTTON  
Use to pause and restart the operation.  
To change the washing procedure during operation, press this button to stop, and once again to restart after  
changing the procedure.  
3. DELAY START BUTTON  
Press this button when delay start washing is needed.  
4. PROGRAM BUTTON  
With every press of this button, the washing course changes;  
SENSOR HEAVY DUTY ECONO WASH WOOL DELICATE SENSOR  
5. SUPER CLEAN BUTTON  
Press the button once to perform SUPER CLEAN.  
To release the function, change the course by pressing a Program button, or press the Cycle Select button.  
6. CYCLE SELECT BUTTON  
With every press of this button, the function changes:  
SOAK&WASH&RINSE&SPIN WASH RINSE SPIN RINSE&SPIN WASH&RINSE&SPIN   
SOAK&WASH&RINSE&SPIN  
7. WATER LEVEL SELECT BUTTON  
According to the wash load, select the water level;  
AUTO EXTRA LOW LOW MEDIUM HIGH  
8. TEMPERATURE SELECT BUTTON  
As you press this button, the type of water is selected as follows.  
COLD COLD + HOT HOT COLD  
9. REMAINING TIME INDICATOR LIGHT  
The indicator light shows the remaining time (in minutes) of each wash cycle.  
At the end of the cycle, the power automatically switches off.  
7
 
SW68ASP-02290A-EN.indd  
7
2006-08-21 ¿ÀÈÄ 8:33:16  
WASHINGINSTRUCTION  
PROCEDURE  
1. Sort the laundry into separate wash loads.  
Each load of washing should contain clothing which needs the same washing conditions.  
For example, you should not wash delicate clothes with very dirty work clothes.  
2. Load the laundry into washing.  
Before load, check all pockets, and close zippers, hooks and eyes.  
3. Add the detergent.  
4. Add the fabric softener.  
5. Close the lid.  
6. Press power button.  
7. Choose the wash program & optional cycle.  
If you choose “SENSORprogram you don’t need to select water level.  
Water level is set automatically at “SENSORprogram.  
Press the START/PAUSE button.  
8. Select the water level.  
Before choosing the water level, remember following things.  
When you choose SENSOR, HEAVY-DUTY, ECONO-WASH, DELICATE program,  
water level is selected “AUTOautomatically, but if you want to choose water  
level manually you can select. HIGH, MEDIUM, LOW, EXTRA LOW  
9. Select the water temperature.  
Before choosing thr water temperature remember the following:  
1) You can choose HOT, HOT+COLD, COLD on all programs except for delicate program.  
HOT is hot wash and cold rinse.  
COLD is cold wash and cold rinse.  
2) When you choose delicate program, water temperature is selected automatically.  
10. Close the lid and press the START/PAUSE button.  
11. Do you want extra rinse?  
For extra rinses press the cycle key 1 to 5 times  
(depending on the number of extra rinses required).  
You can select up to 5 extra rinses or return to a single rinse by pressing the cycle key.  
The time left display will show the number of rinses selected.  
Note that the extra rinse program is not available when pause is selected or during the spin cycle.  
WASH PROGRAM  
SENSOR  
18 min  
Normal  
HEAVY DUTY  
21 min  
ECONO WASH  
18 min  
WOOL  
6 min  
DELICATE  
6 min  
SUPER CLEAN  
6 min  
Wash Time  
Wash Action  
Normal  
Normal  
Gentle  
Gentle  
Normal  
HOT  
HOT + COLD  
COLD  
HOT  
HOT + COLD  
COLD  
HOT  
HOT + COLD  
COLD  
HOT  
HOT + COLD  
COLD  
Wash Temp.  
HOT + COLD HOT + COLD  
COLD COLD  
HOT + COLD HOT + COLD  
Deep Rinse  
Spin Time  
COLD  
6 min  
COLD  
6 min  
COLD  
6 min  
COLD  
6 min  
COLD  
COLD  
6 min  
6 min  
Total Time  
(High Water  
level)  
56 min  
59 min  
55 min  
8
41 min  
42 min  
60 min  
 
SW68ASP-02290A-EN.indd  
8
2006-08-21 ¿ÀÈÄ 8:33:18  
WASHINGPROGRAM  
SENSOR Program  
HEAVY DUTY Program  
The best washing program is chosen automatically  
Load size and water level is determined automatically  
Unplug the power cord after washing.  
This program is suitable for heavily soiled laundry  
Load size and water level are determined utomatically  
or you can choose the water level you want  
Unplug the power cord after washing.  
ECONO WASH Program  
WOOL Program  
This program is suitable for woollen clothes  
Only high and medium water levels are available  
Saving your time and energy  
This program is suitable for saving water consumption  
Load size and water level are determined automatically  
or you can choose the water level you want  
Unplug the power cord after washing.  
Unplug the power cord after washing.  
DELICATE Program  
Washing action is very gentle, so this program is suitable for  
delicate clothes like lingerie.  
Load size and water level are determined automatically  
or you can choose the water level you want  
Unplug the power cord after washing.  
OPTIONALCYCLE  
SOAK  
WASH ONLY  
When you choose this cycle, only wash cycle is operated.  
Pressing optional cycle key during washing changes the wash  
time in two minute intervals.  
The wash time can be changed to between 3 and 25 minutes.  
Load size and water level is determined automatically.  
Unplug the power cord after washing.  
The laundry is soaked in water so that heavy dirt can be  
eliminated sufficiently.  
You can choose soak cycle after choosing wash program.  
When you select soak function, 5 minute cycle (1 min. washing  
then 4 min. pause) continue for 30 minutes before main wash  
program.  
Load size and water level is determined automatically.  
Unplug the power cord after washing.  
RINSE ONLY  
SPIN ONLY  
When you choose this function, only rinse cycle is operated.  
Pressing function key during rinsing changes the number of  
rinses. Up to 5 rinses can be optionally selected.  
Unplug the power cord after washing.  
When you choose this cycle, only spin cycle is operated.  
Pressing cycle key during spinning only cycle changes the  
spin dry time.  
The spin dry time can be changed to between 1 and 7 minutes.  
Unplug the power cord after washing.  
DELAY START  
This function allows you to delay the start of your chosen wash  
program for 3, 4, ... 18 hours.  
RINSE AND SPIN ONLY  
When you choose this cycle, only rinse & spin cycle are operated  
without wash cycle.  
By pressing the delay start key you can select delayed period for When the CYCLE button is pressed during operation, the rinse  
3, 4, ... 17, 18 hours, and your washing machine will finish  
the selected wash program after the delayed period.  
times can be changed to between 1 to 5 times in duration.  
Unplug the power cord after washing.  
SUPER CLEAN  
If you pressing the Super Clean button after selecting a program, the program changes to the Super Clean course.  
To release the function, change the course by pressing a program button, or press the Cycle Select button.  
When Super Clean is selected, the total time is extended with the addition of a specific period of time.  
When Super Clean is selected, the LOW water level is selected by default and detecting the volume of laundry is skipped.  
The wash proceeds in five steps. (You can only select HIGH, MEDIUM, or LOW for the water level.)  
CHILD LOCK  
This is a device to protect children from being accidentally hurt while playing with the washer.  
How to start the Child-Lock function:  
- Press the “Powerbutton to go to an initial washing mode.  
- By pressing “Start/Holdbutton, you start washing and in case Child Lock function is needed during the laundry  
- Press both the “Water leveland “Functionbuttons at the same times. (for 3 seconds)  
(Note: You cannot perform the function without the “Powerbutton on.)  
In the event that you would like to modify the Child-Lock function, “Lsignal flashes in the “signal window showing the rest of the set  
timeevery two seconds, which means it is locked and indicates how much time is left until the function is released.  
To release the function of Child-Lock:  
- In case the “Child-Lockis programmed, press both the “Functionand “Water levelbuttons at the same time.  
9
 
SW68ASP-02290A-EN.indd  
9
2006-08-21 ¿ÀÈÄ 8:33:18  
TROUBLESHOOTING  
Spinning does not work  
Washing machine won’t work  
Is the water tap opened?  
Is the washer plugged in?  
Is the power cut off?  
Is the laundry spread out evenly  
in the washer?  
Is the washer set on a sturdy  
flat surface?  
Is the fuse all right?  
Is there enough water?  
Is the lid closed?  
Water does not drain  
Water is not supplied  
Is the drain hose down? (No pump)  
Is the drain hose frozen?  
Is the water tap opened?  
Is the water cut off?  
Is the drain hose clogged?  
If the water does not drain in 15  
minutes, a buzzer will sound,  
and the remaining time  
Is the water supply hose or hose  
connection clogged?  
Is the water tap frozen?  
If water is not supplied in 60  
minutes, a buzzer will sound,  
and the remaining time indicator  
will shown “4E.  
indicator will show “5E”  
While lid is opening, the washing  
machine won’t work  
Water is overflowed  
Restart after spinning.  
If the error sign still indicates,  
call agency.  
Make sure to close the lid while washing  
machine is operating.  
SPECIFICATION  
SW68ASP  
6.5  
SW57APP  
Load capacity(kg)  
Bowl  
5.5  
Stainless Steel  
PP  
Power input(Watts)  
Size (WxDxH)(mm)  
Net Weight (kg)  
450  
600x660x1010  
48  
Water Consumption(liters)  
Water Pressure(min-max)  
134(high)  
137(high)  
50~780KPa  
10  
 
SW68ASP-02290A-EN.indd 10  
2006-08-21 ¿ÀÈÄ 8:33:19  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care center.  
Samsung Electronics Australia  
1300 362 603  
 
SW68ASP-02290A-EN.indd 11  
2006-08-21 ¿ÀÈÄ 8:33:20  

Raritan Engineering DVD VCR Combo 255 80 6030 User Guide
Rolls Stereo Amplifier MP110 User Guide
Samsung All in One Printer 4700 User Guide
Samsung Blu ray Player SE 506BB TSBD User Guide
Samsung Clothes Dryer DV56H9100EG User Guide
Samsung Medical Alarms 49 418 User Guide
Samsung Security Camera SVD 4600 User Guide
Seagate Computer Drive 1AYBA2 User Guide
Senario Handheld Game System 20986 User Guide
Senco Staple Gun SLS15Mg User Guide