IFM56CB
Internal FaxModem 56K
Introduction
The Internal FaxModem 56K is Bell, ITU-T (formerly CCITT) compliant and Hayes AT
command compatible, so that it can be used worldwide with today’s popular communication
software programs. You will be able to send and receive faxes to/from any Group 3 compatible
fax machine. Using standard phone lines, the data communication functions of the modem allow
you to successfully hook up to the Internet, transmit E-mail, send and receive information and
communicate with other PCs, Bulletin Board Services (BBS) or computer networks such as
Compuserve.
Specifications
Data
K56flex, V.90, V.92, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, and V.21, Bell 212A and
Bell 103
Fax
V.17, V.29, V.27ter, and V.21 channel 2 Group 3 send and receive facsimile
Error Correction
V.42 and MNP 2-4
Data Compression
V.42bis and MNP 5
Communication software compatible commands
- Hayes compatible enhanced "AT" command set
- Fax Service Class 1 commands
Built-in DTE interface
- DTE speed up to 115,200 bps
- 16C550 UART interface
System Requirements
ꢀ
ꢀ
ꢀ
A telephone line with RJ-11 jack
A CD-ROM drive
Windows 95/ 98/ ME/ 2000 or Windows NT pre-installed
|