Belkin Car Stereo System F5U203UK User Manual

USB Anywhere  
EN  
Manufacturer’s  
Lifetime  
Warranty  
F5U203uk  
User Guide  
P74859uk-A_F5U203uk.indd  
1
24/8/05 9:39:01 am  
 
Operating Environment  
Package Includes  
Copying all data files from the source device: Full Mode  
1. To copy ALL files from the source device to the target device, move the Full/Root switch in  
the “Full” position.  
-
-
-
-
Operating Temperature: 5-45oC  
Shipping and Storage Temperature: -40 -65oC  
Operating Humidity: 30% - 85%  
Altitude: 0 to 7000 feet  
-
-
-
USB Anywhere  
Power Supply (DC 5V/1.5A-2.6A)  
User manual  
2. Connect your source device. The source LED will pulse with a green light until the device  
is recognized. Once the device is recognised, the LED will then light up with a solid green  
light. If the source LED turns red, the attached device is not a suitable source device.  
3. Before connecting your target device, make sure the target device has sufficient unused  
memory space for the files you are about to transfer. It is possible for the source device  
to have a higher storage capacity than the target device. However, the files that are to be  
transferred must not exceed the unused memory space on the target device.  
Getting Started  
1. Install three AAA alkaline or rechargeable batteries (batteries not included) or plug in the AC  
power adapter. Please note: Some MP3 players will require additional power in which case  
the AC power adapter has to be plugged in.  
4. Connect your target device. The target LED will pulse with a green light until the device is  
recognized. Once the device is recognised, the LED will then light up with a solid green  
light. If the target LED turns red, the attached device is not a suitable target device or does  
not have enough memory space available for the files you are about to transfer.  
2. Press the Power button to turn the USB Anywhere on.  
5. Press the Copy button to transfer data from the source device to the target device.  
The source and target LED will start pulsing for the duration of the data transfer.  
6. Once the data transfer is complete, the source and target LED will stop pulsing and the LED  
in the shape of a checkmark () will light up green.  
P74859uk-A_F5U203uk.indd 4-5  
24/8/05 9:39:03 am  
 
5. Press the Copy button to transfer data from the source device to the target device. The  
source and target LED will start pulsing for the duration of the data transfer.  
Copying files in the root directory: Root Mode  
Root directory: the top directory in a file system. The root directory is provided by the  
operating system and has a special name. For example, in DOS systems the root directory is  
called \.  
6. Once the data transfer is complete, the source and target LED will stop pulsing and the LED  
in the shape of a checkmark () will light up green.  
1. To copy only the file(s) in the root directory from the source device to the target device,  
move the Full/Root switch on the USB Anywhere into the “Root” position.  
Data transmission errors  
If the LED in the shape of a checkmark () turns red during copying, this means that a data  
transmission error has occurred. The copy was not successful. To continue, please carry out  
the following:  
2. Connect your source device. The source LED will pulse with a green light until the device is  
recognized. Once the device is recognised, the LED will then show a solid green light. If the  
source LED turns red, the attached device is not a suitable source device.  
3.Before connecting your target device, make sure the target device has sufficient unused  
memory space for the files you are about to transfer. It is possible for the source device  
to have a higher storage capacity than the target device. However, the files that are to be  
transferred must not exceed the unused memory space on the target device.  
1. Press the reset button.  
2. Check if the target device has sufficient unused memory space to hold the files you wish  
to transfer.  
3. Repeat the instruction for copying files as described previously.  
4. Connect your target device. The target LED will pulse with a green light until the device is  
recognized. Once the device is recognised, the LED will then light up with a solid green  
light. If the target LED turns red, the attached device is not a suitable target device or does  
not have enough memory space available for the files you are about to transfer.  
P74859uk-A_F5U203uk.indd 6-7  
24/8/05 9:39:04 am  
 
Low battery indicator  
Data files on the target device  
The LED in the shape of a battery indicates the power status of your batteries. When the  
LED lights up, this means that the batteries have sufficient power for operation of the USB  
Anywhere. If the LED does not light up when you switch on the USB Anywhere, or indeed  
shuts off during operation, you will need to replace the batteries with a new set. The included  
power supply can also be used as an alternative to batteries.  
Transferring data from the source device to the target device does not overwrite any existing  
data on the target device. With each new transfer operation, a new folder will be created which  
will hold the newly transferred data.  
Transfer of hidden or secured files  
The USB Anywhere will not copy any hidden or secured data from the source device to the  
target device. Such protected data can include MP3 files.  
Automatic power shutdown function  
The USB Anywhere will shut down automatically after 30 seconds if it is not in use or after  
a device is unplugged. If you choose not to use batteries, the USB Anywhere will shut down  
once it is unplugged from the power supply.  
Belkin lifetime product warranty  
For the life of the product, Belkin warrants that this device shall be free of defects in design,  
assembly, material and workmanship (free replacement).  
End file transfer  
If you wish to interrupt the data transfer process, simply press the Reset button on the USB  
Anywhere. The USB Anywhere will stop the transfer and will return to starting position. Any  
files that were already transferred prior to the interruption will remain on the target device.  
P74859uk-A_F5U203uk.indd 8-9  
24/8/05 9:39:04 am  
 
P74859uk-A_F5U203uk.indd 10-11  
24/8/05 9:39:04 am  
 
USB Anywhere  
Belkin Ltd.  
Belkin GmbH  
Hanebergstrasse 2  
80637 Munich, Germany  
+49 (0) 89 143405 0  
+49 (0) 89 143405 100 fax  
Express Business Park  
Shipton Way, Rushden  
NN10 6GL, United Kingdom  
+44 (0) 1933 35 2000  
+44 (0) 1933 31 2000 fax  
Belkin SAS  
130 rue de Silly  
Belkin B.V.  
Boeing Avenue 333  
92100 Boulogne Billancourt  
France  
+33 (0) 1 41 03 14 40  
+33 (0) 1 41 31 01 72 fax  
1119 PH Schiphol-Rijk, The Netherlands  
+31 (0) 20 654 7300  
+31 (0) 20 654 7349 fax  
Belkin Tech Support  
Europe: 00 800 223 55 460  
© 2005 Belkin Corporation. All rights reserved. All trade names  
are registered trademarks of respective manufacturers listed.  
P74859uk-A  
P74859uk-A_F5U203uk.indd 12  
24/8/05 9:39:05 am  
 

Blanco Indoor Furnishings 531 430 User Manual
Breville Toaster BOV800XL User Manual
Briggs Stratton Pressure Washer 020206 02 User Manual
Canon All in One Printer S830D User Manual
Canon Scanner 2923B002 User Manual
CDA Ventilation Hood CIN6 User Manual
Chauvet Indoor Furnishings ZX 5 User Manual
CH Tech Network Card PX454S User Manual
Cisco Systems Network Card 10BASE FL User Manual
Cisco Systems Network Card 2600 User Manual